Tengda (Tenda) A3 How to open the Setup interface? A3 access to the management interface approach

Step one, we first set a fixed IP address.

1. In the computer we right-click on the desktop "network" or "Internet Neighborhood" in the pop-up menu we click "Properties" (different systems will be a little different)

2. Then we right-click "Wireless Network Connection" and select "Properties" as shown in the following image.

3. Then, in the open properties, we double-click Internet Protocol (TCP/IP):

4. In open Internet Protocol (TCP/IP), we find "use the following IP address", enter IP address 192.168.0.100 subnet mask 255.255.255.0 OK

Note: If the computer is wired to connect to the wireless AP, follow these steps to set the local connection IP address.

1. OK, now we open the browser and enter 192.168.0.254 in the Address bar.

2. Now look at whether the pop-up login box, OK now we enter admin click "Login":

3. Then enter your router password, then click Login

4. Access to the router we then click "Advanced Settings" to enter the advanced settings interface.

Here we can access some wireless username and password settings oh.