Test-how to test an elevator

From: http://blog.csdn.net/txx9010/article/details/8659051

Requirement test:
View elevator instruction manual, safety instruction manual, etc.

Interface Test:
View elevator appearance

Function test:
1. test whether the elevator can be properly upgraded or downgraded.
2. Can all the buttons of the elevator be used.
3. Whether the elevator door is opened and closed properly.
4. Whether the alarm device is available.
5. Good collaboration with other elevators.
6. How is the ventilation condition.
7. Sudden Power failure.
8. response on the rise.
1) the elevator is originally on the first floor. If someone presses the 18 th Floor, when the elevator rises to the 5 th floor, someone presses the 10 th floor. Will the elevator stop at the 10 th floor;
2) When the elevator drops to the 10th floor, it is displayed as full. If there is a person waiting for the elevator on the 8th floor, whether the elevator stops on the 8th floor.

Reliability:
1. An obstacle occurs when the door is closed.
2. Press the close and open button at the same time.
3. Click the number of the current floor.
4. Click the number on the same floor multiple times.
5. What if I press the upper key and lower key at the same time.

Ease of use:
1. Is the elevator button designed to be used by ordinary people.

Load/stress testing:
1. check whether there is a reminder when the elevator is overloaded.
2. Continuously let the elevator rise and fall in a period of time.

Stability test:
1. maximum duration of stable operation under the maximum load.

Document test:
1. Whether the user manual describes the usage, restrictions, and conditions of the elevator in detail

Test-how to test an elevator