The ADSL route setting method of ZTE 831adsl Modem

Zhongxing 831ADSL Modem

How to set 831:

First, 831 of the built-in software brush to 2. 79 version, can www.zte.com.cn download (how to brush in the description inside)

831 the factory set Ethernet port IP address is 192. 168. 1. 1, in order to be able to use Telnet access to 831, we now set the address of a computer to 192. 168. 1. *, using ping 192.168.1.1 to see if you can access to 831, no problem continue, in DOS mode into Telnet 192.168.1.1, if you just brush good software, there is a password, the original password is adsl831 then we have landed to 831, It's a prompt like this.

>>

We use the help command to get a general idea of the commands we can use. I don't have much to say.

Teach everyone how to set up:

Mode

The problem is whether you choose the bridge mode or the routing mode, choose R Carriage Return

>>r1483 Carriage return

r1483> Delwanip All Carriage return

(This sentence is to empty the inside of the settings data if the back is wrong, you must call the command again)

R1483> Home Carriage return

>>

And then we do the quick setup

Quick return

The system will ask you to connect the WAN in that way, we choose PPPoE.

System again asked Ethernet Ip: we call 192. 168. 1. 1 (be sure to play)

Then ask the subnet mask subnet mask: we call 255. 255. 255. 0

Vpi:8

vci:81

Authentication (verification method), we hit P,