The basic experiment of information security system design transplantation of three real-time systems 20135327 Guo Hao 20135329 li Hai-air

Beijing Institute of Electronic Technology (BESTI)

Real Inspection report

Course: Information Security design Basic class: 1353

Name: Guo Hao li hai Empty

Study No.: 20135327 20135329

Score: Instructor: Lou Jia Peng Experimental Date: 2015.11.24

Experiment level: Preview degree: Experiment time: 15:30~18:00

Instrument Group: Compulsory/Elective: Experiment Number: 3

Experiment Name: Experiment Three: transplantation of real-time system

Experimental purpose and Requirements: can successfully print out the wavy line on the ARM Development Board

                                                                  

Experimental instrument:

Name	Model	Number
ARM Experiment Box		1
Pc		1

Experiment contents, steps and experience:

1. Connect the experimental box power, use serial line, line, network cable, connect the experiment box and the host

2. Install Ads

3. Installing the Giveio Drive

4. Installing the JTAG Driver

5. Configure HyperTerminal: Baud rate is 115200, data bit 8, no parity check, stop bit 1, no data flow control.

6. Test that the basic installation is correct

1. First run the ADS1.2 integrated development Environment
2. Click the File->open option
3. Select the project file we use the/ucos v6.0/exp11 drawing API function in CD-ROM as an example to select the post-EXP11.MCP point

4. Select the files that need to be compiled, click on the blank location in front of the corresponding folder to select, the header file library file is not selectable

5. Click Make to compile the link
Click this button
Compile results appear after compilation, and the secondary picture shows no errors, 4 warnings, and 15 additional information. If it is not the following result, the possible problem is that the code path is in Chinese, copy the code in an English directory, and possibly the Exp11_data folder in the Code folder, delete the Exp11_data folder.

6. Be sure to turn on the Uarmjtag click Initialize configuration option before running the debugger ARM9 click OK. Minimize to the pallet and ensure our platform stops in the VIVI state.

7. Click the Debug button to debug the simulation
Popup Debug Interface
8. Follow the steps to debug

1. The understanding of the experiment process, the understanding of the knowledge point in the experiment instruction book.

(1) Linux porting?

The so-called Linux migration is the Linux operating system for the specific target platform to do the necessary rewriting, installed on the target platform to make it run correctly.

1. The problems encountered during the experiment and the solutions.

(1) The image cannot be printed out.

Solution: Box problem, change the box after the successful printing!

The basic experiment of information security system design transplantation of three real-time systems 20135327 Guo Hao 20135329 li Hai-air