The course of color mixing of PS grinding skin

Photoshop Abrasive color processing tutorials, graphics and text tutorials.

Original

Effect chart

1, open the original image, duplicate a layer, build a level adjustment layer, correct the picture of the light and shade.

The adjustment parameters are as follows:

RGB Channel

Red Channel

Green Channel

Blue Channel

After the adjustment, the effect is as follows: The picture looks much more normal.

2, press Ctrl+shift+alt+e stamped layer, then use portraiture filter to grind skin.

3, after grinding the skin and then use the Stamp tool to remove some obvious stains. Create a snapshot before using the stamp to prevent the stamp from being used satisfactorily you can click Snapshot 1 to return to

Portraiture this step, and then grind again.

Enlarge the picture so that it is more precise and detailed. Select the Clone Stamp tool, set the opacity and flow rate low, and hold down the ALT key to click on the spot near the stain.

Similar skin, loosen Alt, click on the stain, cover with similar skin, and continue to draw similar skin to cover the stain.

After the stamp is worn, the effect is as follows:

4, the establishment of optional color adjustment layer, adjusted as follows:

Red:

Yellow:

After the optional color adjustment finishes, the effect is as follows:

5, press Ctrl+shift+alt+e stamped layer. Execute image-Apply image as follows:

(The applied image is the Channel + layer mode.) We can go to try, the Green channel copy paste to the layer, the mode set to: Soft light, the effect is the same.

This completes the final effect!