The inspection method of the router management interface is not open

I am in the process of surfing the Internet, occasionally encountered a problem, that is, the network suddenly disconnected, and the management interface of the router can not open, encountered this situation, I summed up a few troubleshooting steps, in general, the problem can be solved.

Main troubleshooting steps:

First, check the interface of the network cable is normal, pull out to plug in again, note that the interface, including the router's network cable interface and the computer's network interface, see the light is not bright, if the landing can not, change the interface to try

Second, according to the above method can not solve the problem, the power is disconnected, after a few minutes and then plug in to see.

Third, if you can not login to the management interface, then the router to restore factory settings to see.

If the problem is not resolved, I guess your router is probably broken, if you have the conditions, try another router. Go from computer to master network

Through the above four steps, the problem can generally be solved.

Other possible causes:

In addition, the router management interface is not open, but also may be the following causes of these reasons, users can pay attention to. Transferred from www.58116.cn

1, if you are using the router for the first time, please confirm:

① network cable is connected to the correct port (LAN port), the corresponding LED is normal (network card lamp and router corresponding LAN mouth light);

② whether your computer's IP is a network segment of the router LAN port. For example, the router management address is 192.168.1.1, subnet mask: 255.255.255.0, the IP address of the computer should be set to: 192.168.1.X (between X 2-254);

2, if you have modified the router's management port, then note:

The next time you enter the router you need to Http://LAN port ip:xx way to login, XX for the new port number, such as: http://192.168.1.1:8080.

3, if you can log in before the normal router, now can not enter the router, then:

It is possible that someone has modified the router's configuration or the default 80-port-led attack (especially when remote administration is turned on), it is recommended to reboot or reset the router, modify the router's management port, and modify the user name and password.

4, if the reset is still unable to enter the router or start a period of time to enter, but after a period of time can not enter the router, you may suffer from ARP spoofing, it is recommended to install 360 or other anti-ARP spoofing software, find the source of deception, kill virus or isolate it.

Go from computer to master network

5, check whether the installation of IE Agent: from the computer to master the network

Open IE Browser, select Tools-> Internet options-> connection-> LAN settings:

Please make sure that the "Proxy Server for LAN" option above is not checked and, if checked, should be canceled.