The memory causes the boot alarm and so on to solve the trouble

Source: Internet
Author: User
Tags safe mode

Memory is one of the important parts of computer, so the quality of memory directly affects whether the computer can work stably for a long time. We often meet with memory related to the failure of the boot alarm, black screen, the host can not add electricity, and so on, the following to specifically look at the memory damage to the computer failure solution.

Memory corruption causes power-on alarm
This kind of failure should be often encountered, and most of the night before the good, the next day to boot, hear not usually "tick" of a sound, but "tick, tick, tick ..." Rang non-stop, the monitor also has no image display.

This fault most of the time because the computer's use of the environment is not good, humidity is too large, in the process of long use, the memory of the gold finger surface oxidation, resulting in memory gold fingers and memory slot contact resistance increased, blocking the current through, and thus memory self-test error. Performance for a boot on the "tick" rang non-stop, that is, we often say "memory alarm."

The solution to this problem is also very simple, that is, to remove the memory, use the eraser to the memory on both sides of the gold fingers carefully scrub clean, and then plug back into the memory slot. Here to note that, in the scrub gold fingers, as far as possible not to contact the hands of gold fingers, because the sweat on the hands will be attached to the gold finger, in the use of a period of time will again cause gold finger oxidation, repeat the same fault.

Memory corruption causes the system to report registry errors frequently
This type of failure is manifested in the ability to boot the system normally, but when you go to the desktop, the system prompts for a registry read error, and you need to restart the computer to fix the error, but again, after you restart the computer, it is still the same problem.

For this kind of problem, we can go into safe mode, type the "MSCONFIG" command in the run, remove the scanregistry in front of the "startup" item, and then restart the computer. If troubleshooting, it is true that the problem is caused by a registry error, and if the failure persists, you can basically conclude that there is a problem with the machine's memory, and you will need to replace it with a good performance memory bar to check for the same fault.

Memory causes an error in the installation system to extract files
This type of failure is common during installation of the system, and often unexpectedly exits the installation. In fact, this is often due to poor quality of memory or poor stability, most of the problems can be solved after replacing memory.

If this failure occurs on my computer, you can replace the memory directly and see if the same failure still occurs. If the failure disappears, indicating that the original memory problem, if the failure is still the case, most due to poor quality of the CD or CD drive reading disk, or the system installation files on the hard disk damaged.

Memory short circuit causes host to not power on
This kind of situation may many friends have not met, often this kind of fault memory damage will be more serious, but the memory chip surface, the gold finger, the resistance capacity does not necessarily have the obvious burning trace, sometimes and the intact memory is identical. However, after inserting memory into the motherboard, the motherboard will not power up. When the power is plugged into the power plug, press the power switch, the host has no response, the CPU fan and Power fan are not working, the power LED is not bright, and no electricity when the same.

In fact, if you meet this problem, we should first check the power supply, you can use a paper clip to short-circuit the power supply, to see if the power supply is working, to confirm that the power supply is not a problem, and then troubleshoot other failures, memory of this fault is particularly small, so here do not introduce more, we only need to have this situation on the

The above mentioned is that there are memory problems caused by the calculation of the phenomenon of failure, while the notebook power-on alarm black screen, may also be related to the memory of the notebook, we can also focus on the memory of the notebook problem.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.