The method of installing Win7 system in Apple notebook

Apple Notebook install Win7 steps:

1, first with the U-Master disk launch disk production tools will be a U disk to start a U disk;

2, then plug the U disk into the computer, restart the computer, because the Apple notebook does not have BIOS settings, so want to start with U disk is usually inserted u disk, computer startup long Press "OptIn key", will enter a boot-start option interface, the following figure.

3, then use the arrow keys to select the right "U disk start", and then enter into;

4, the U disk inserted in the computer, select from the U disk to start the computer, into the U Disk menu selection interface, you can choose according to their own options, here Select the "01" option;

5, into the PE, double-click on the desktop "Partition tool Diskgenius" icon, will pop an interface, next we will delete all the partition work, so before this must be the data to backup well, to prevent data loss can be used to restore;

6, in the pop-up window to select a hard disk partition, and then see the "Delete Partition" icon becomes brighter, then click on it, according to this method in turn all the partitions are deleted, as shown in the following figure will find the "delete icon" will turn gray again.

7, after the deletion, click on the top of the "Save Changes" icon, and then bounce out of the window click "Yes" button;

8, then click on the top of the "hard disk", select "Transform partition table type for MBR format", and then pop-up an interface, click Yes;

9, then click the Interface menu bar above the "fast Partition", in the pop-up window, we can set the number of partitions and partition size, after these settings, click "OK" button;

10, after the partition, continue to click on the Interface menu bar "Hard disk", select "Rebuild Master boot Record (MBR)" option, in the pop-up interface click OK button;

11, and then double-click to run the "U Master one-click Restore backup System" tool, click the "Browse" button to find the. gho file that you just prepared, as shown in the following figure.

12, choose a good Gho file, select the system installation directory (here must choose the system disk), and then click the "Start" button;

13, in the Pop-up warning box, click "Yes", then the system will automatically run the installation;

14, after the installation, will pop up "restore success" window, will be prompted to automatically restart after 15 seconds, wait for reboot, then after the completion of the subsequent installation of the system.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join