The most basic hardware maintenance principle for beginners to use notebook computers

Liquid crystal display screen (LCD Panel)

Long time does not use the computer, may through the keyboard function key temporarily only then the liquid crystal display screen power supply closes, besides saves the electricity also to extend the screen life.

Do not force the lid on the LCD screen or place any foreign body between the keyboard and the display screen to avoid damage to the internal components caused by the heavy pressure on the cover glass.

Do not touch the surface of the screen with finger armour and sharp objects (hard objects) to avoid scratching.

LCD screen surface will be electrostatic absorption of dust, the proposed purchase of LCD screen special wipe cloth to clean your screen, do not use your fingers to remove fingerprints, and please gently wipe.

Do not use chemical detergent to wipe the screen.

　Battery (Battery)

In the absence of an external power supply, it is recommended that the card be moved divided by extending the battery time if the current working condition is temporarily unavailable to the card in the PCMCIA slot.

Room temperature (20-30 degrees) is the most suitable operating temperature of the battery, the temperature is too high or too low operating environment will reduce battery use time.

When using a portable computer in an environment that provides a stable power supply, removing the battery can prolong the battery life is incorrect. In the case of Asus laptops, when the battery is fully charged, the charging circuit in the battery shuts down automatically, so there is no overcharge.

An average of three months of battery power correction is recommended.

The power adapter (AC Adapter) is used with reference to the international voltage specification "

Keyboard (keyboard)

When you accumulate dust, you can clean the gap with a little brush, or use a high-pressure jet tank that is usually used to clean the camera lens, blow out the dust, or use a handheld vacuum cleaner to clear the dust and debris from the keyboard.

Clean the surface, the soft cloth can be stained with a little detergent, in the case of the shutdown gently wipe the keyboard surface.

　Hard disk (Hard disk)

Try to use it in a stable condition to avoid operating the computer in an easily shaken location.

The process of switching machines is the weakest of hard drives. At this time the hard disk bearing has not yet stable speed, if the vibration, it is easy to cause bad rail. It is recommended to wait about 10 seconds after the shutdown and then move the laptop computer.

The average monthly disk reorganization and scan is performed to improve disk access efficiency.

　　Touch pad (Touchpad)

When using touch pad, be sure to keep your hands clean to avoid the phenomenon of cursor running.

Accidentally dirty surface, you can dry cloth wet a corner lightly wipe touch board surface can, do not use rough cloth and other items to wipe the surface.

Touch panel is an inductive type of precision electronic components, do not use sharp objects in the touch-screen writing, also can not be stressed to use, lest cause damage.