Why would there be scratches?
Although theoretically, the hardness of the metal and other hard things we are exposed to is not high, but if you do not film, put the iphone in the pocket and bag, the years will always let it contact with dust. In the dust, there is the most lethal opponent of glass-sand. The composition of sand and glass, are all silica, on the Morthi and the hardness of the glass, so they are able to scratch the glass. In fact, most of the tiny scratches on the iphone screen are actually caused by sand in the dust.
But with no hurry, today small series for everyone introduced this method, to ensure that scratches extremely easy!
Take precautions to foil the film
Although today's introduction is to eliminate scratches the method, but still suggest everyone, want to completely eliminate scratches on the phone damage, or paste a film good.
Here, the small part of the proposal to choose a better quality high permeable film or toughened glass film.
How to eliminate scratches
First of all, please buy "watch" glass polishing agent first. This polishing agent is a very small powder to wipe the scratches, so pay attention to the phone screen has other paint, lest the polishing agent to erase the paint. But as far as the iphone is concerned, direct use is no problem.
The first step, the first tape to the headphone hole, horn hole, microphone, home key, etc. may allow the polishing agent to penetrate the place covered up, the screen partially exposed.
The second step, the polishing agent gently smear in the scratch, and then use the "polishing cloth" gently to draw round the way to wipe until the polishing agent is not visible. If the polishing agent is gone, but the scratches are still there, repeat the polishing agent and wipe the steps until the scratches disappear.
The third step, after the scratches disappear, the tape removed, with a little polishing cloth with a few polishing agent, gently wipe the tape cover of the place. Note that this side as long as a little polishing agent is good, and must be careful not to let the liquid flow into the horn hole and other places.
Finally, use another piece of cloth (such as glasses cloth) slightly wet, do not use too much water, a little wet on it. Dry the rest of the polishing agent and it's done.
