Tools/raw Materials
Alcohol or liquor
Paper towels
Screwdriver
Needle or toothpicks, compasses, etc any kind of fine and sharp tool
Knife or blade
Method/Step
1, with a screwdriver on the mouse casing screws removed, insert the shell, exposing the internal circuit board, pay attention not to the mouse connector broken, unless you have welding tools, or carefully for good.
2, the mouse button position of the two components is the mouse micro-switch, such as the figure, then take apart this to repair, remove the time to be very careful, very easy to deformation, then feel bad.
3, with a blade inserted as the figure red box callout gap, gently pry open, note that this time do not unplug the top of the lid, you should first use needle from the small gap in the bucket opposite the same position, and then you can take off the lid.
4, this is we can see the structure of the switch inside, is very simple copper, but a slight deformation will lead to a great change in the feel, you can adjust according to their preferences repeatedly.
5, we inserted the base of copper, and alcohol and paper towel cleaning as the picture of the electric shock, in the base on the corresponding position also such treatment on the line. Finally, the mouse is reassembled.
6, after the above repair, a button broken mouse will be able to reproduce the vitality! Don't thank me, I'm just bored to write this piece of experience, can help you also is a dot de.
Attention matters
Make sure you don't distort the patch.