The phenomenon of the router interface is not open and troubleshooting and solution

What if the router interface doesn't open? Don't worry, here are your illustrations.

1, the router interface does not open the phenomenon and troubleshooting.

1 Please confirm that your line is connected correctly, click the link to see if the line connection is correct.

2 Phenomenon 1: Local connection shows connected, but the router management interface is still not open?

3 Phenomenon 2: Enter the original password admin how all can not enter the router interface, always prompts the login interface.

4 Phenomenon 3: The login Router management interface Displays the "Work Offline" error.

5 Phenomenon 4: When landing router management interface, display "Dial connection".

6 Phenomenon 5: When landing router management interface, show Pink 401 interface.

7) Phenomenon 6: Prompt cmd

8 Phenomenon 7: Local connection shows restricted or connectionless, IP is private: 169.254.*.*?

2, the specific steps are as follows:

1) The line connects the following diagram:

A. (ADSL modem cat) to the cat out of the network cable, connected to the router (WAN Port), and then connect the computer network cable to the router (numbered 1/2/3/4 any one port), the common wiring method as shown below:

Note: Normally after powerup, the SYS lamp of the router flashes, and the WAN port and the port light connecting the computer illuminated steady or blinks.

B. (No ADSL modem cat) connect the broadband cable to the router (WAN Port), and then attach the computer to the router (numbered 1/2/3/4 of any port), the common wiring method as shown below:

Note: Normally after powerup, the SYS lamp of the router flashes, and the WAN port and the port light connecting the computer illuminated steady or blinks.

2 The local connection shows the connection, but can not enter the router management interface solution.

Reason: The local connection shows that the connection is connected, and the computer has been connected with the router properly. Can not enter the management interface, because the IP address is not the same network segment with the gateway, or the router management IP input error.

Workaround:

(1), the computer is set to automatically obtain IP. (Windows XP system, WINDOWS7 System).

(2), can manually set the computer IP and router gateway of the same network segment.

1, the Windows XP system operation method:

1.1 First click on the lower left corner of the computer "start"-"Control Panel", double-click "Network Connection" to find "local connection."

1.2 Right click on "Local Area Connection" and click "Properties".

1.3 Double click "Internet Protocol (TCP/IP)", select "Automatically get IP" and "Automatically obtain DNS server", and press OK.

2, Windows7 system operation method:

2.1 First click on the desktop of the lower left corner icon, click "Control Panel"-"Network and Internet"-"network and Sharing Center"-"Change adapter settings."

2.2 Right click on "Local Area Connection" and click "Properties".

2.3 Double click "Internet Protocol version 4 (TCP/IPV4)" and select "Automatically obtain IP" and "Automatically obtain DNS server", then tap OK.

3, our Tengda router gateway address is generally: 192.168.0.1, can manually set the computer IP for 192.168.0.X (1.

3 Enter the original password admin how all can not enter the router interface, always prompts the login interface.

Reason: 1, the router's password is not the original password.

2, the problem of the browser.

Workaround:

1, the router reset (long press the reset button of the router, until the SYS lamp does not flash or destroy and then let go), again landing.

2, change a browserand then log in again

4 The Landing Router management interface displays the "Work Offline" error.

Reason: Log in the Router management interface display "Work Offline", this phenomenon for the computer IE settings problem.

Workaround: Click on IE's File menu to cancel work offline, as shown in the following illustration:

5 when landing the router management interface, display "Dial connection".

Cause: This behavior is caused by setting a default dial-up connection for the computer.

Workaround:

Open the browser-Tools menu, Internet Options, select the Connection tab, and then change the "Always dial Default connection" to "Never dial connection" to resolve.

As shown in the figure:

6 Display 401 interface when landing router management interface.

Reason: This situation occurs because the login username or password entered incorrectly, the connection input error three times will appear pink 401 interface, this phenomenon will only appear in the lower version of IE browser, the high version of the browser does not appear this phenomenon.

Workaround:

1, the router reset (long press the reset button of the router, until the SYS lamp does not flash or destroy and then let go), again landing.

2, change the browser.

As shown in the following illustration:

7) Prompt cmd

Reason: The router is not properly powered down or the router reset is unsuccessful.

Workaround:

1, the router power off a few minutes, again landing router interface.

2, the correct reset router (long press the reset button of the router, until the SYS lamp does not flash or destroy and then let go, the reset succeeded).

8 cannot enter the router interface, the local connection shows limited or no connection, IP is private: 169.254.*.*?

Reason: 1, the router's DHCP shutdown.

2, network cable aging or too long cause.

Workaround:

1, the router reset (long press the reset button of the router, until the SYS lamp does not flash or destroy and then let go), again landing.

2, manually configure the local connection and the router the same network segment IP address:

3. Replace the network cable between the router and the computer (within 100 meters).

Our router has a gateway segment of 192.168.0.X (1), as shown in the following illustration: