The solution of slow response of mouse and reaction

the computer's use of time a lot of hardware, there will be an aging of the response is not sensitive phenomenon, where the mouse and keyboard is the most likely situation. For the failure of the mouse to slow down, the small series will be a summary of the various situations, and provide solutions.

The solution of slow response of mouse and reaction

Here, is to introduce themselves through a number of small adjustments to solve the mouse failure phenomenon, if the mouse button failure or connection line disconnect, and so on, only to change the new mouse, small series will be powerless.

　　Malfunction One: mouse malfunction location is not allowed

This kind of failure, many manifestations of the mouse is often unprovoked shift phenomenon, using the mouse when the mouse location is not allowed. This fault is more than the current optical mouse body.

Failure Reason and solution:

1, outside the influence of stray light, memory of the mouse in order to pursue beautiful appearance of the light transmittance is too good, if the optical path shielding, coupled with strong light interference around, it is very easy to affect the mouse internal optical signal transmission, and the resulting interference pulse will cause the mouse error action.

2, the temperature is too high is the crystal or IC operating frequency instability and drift, at this time, only with the same model, the same frequency of integrated circuits or crystal oscillator replacement.

　　Fault two: Connector chip disconnected

The fault performance is the cursor does not move or bad when good, with the hand to push the line, the cursor jitter.

Workaround:

1. First disassemble the mouse and unplug the cable from the circuit board;

2, then, according to the color of the core line and the corresponding relationship between the needle marking;

3, finally, the core line according to the location of the cut off a paragraph, the use of hole-shaped pins and pressure line can be as it is.

PostScript : The above is a small series for you to introduce the two kinds of mouse failure or slow to reflect the solution. Read through this article, you will not need to ask the maintenance staff to solve the problem themselves, some other mouse problems, such as the mouse sensitivity drop, involving the internal structure of the mouse, not professionals are not able to repair, here is not to tell you in detail, in addition, if the maintenance is not good, you can buy a new mouse, After all, the mouse is also very cheap.