The solution of the fault of 0xc000000e error under Win7

When the computer encounters with a surprise incident will cause the Windows system's boot program does not work properly, Win7 can not start normally and also report "0xc000000e" error , encountered 0xc000000e error , We are unable to enter the Safe mode, the following author said that without reloading the system can also solve the 0xc000000e error fault .

0XC000000E's mistake.

First by modifying the BIOS to set the U disk as the first boot device, and then use the U disk version of the WinPE to start the system and run the command prompt tool under the WinPE system, and then enter the following DOS command at the cursor position (each DOS command is entered to press ENTER):

CD C:windowssystem32

Bcdedit/set {default} osdevice boot

Bcdedit/set {default} device boot

Bcdedit/set {default} Detecthal 1

The meaning of these sentences: 1, switch to the "c:windowssystem32" directory (C disk for system disk)

2, set WINDOWS7 on the hard disk partition as the default

3. Set the partition where the Windows7 boot file is the default

4, start the computer from the default location.

After the completion of the above operation, restart the system can be normal login Windows7, this proportion of the system to simple. If you are in the process of using Windows7 also encountered such a startup failure, you can also try to use this method to solve the 0xc000000e error .