The ultimate approach to TP-LINK Wireless LAN Settings

There are many problems with wireless LAN Settings. For various models of wireless routers, I have made a question and answer topic below. I hope to cover all questions about the use of wireless router settings by netizens. Please leave a message to add this question.

Networks are no longer an unfamiliar term for computer enthusiasts. The emergence of networks enables fast and convenient data exchange between multiple computers. Currently, networks can be divided into wired networks and wireless networks, the fundamental difference between the two lies in that a wired network is connected to a vswitch through a network card or network cable, and a wireless network is connected to a wireless switch through a wireless network card;

Recently, many netizens have asked questions about wireless network settings, and repeated replies are difficult to avoid. Therefore, we will describe the wireless network setting process so that users who are new to wireless networks can make a reference. The establishment of a wireless LAN requires a wireless network card and a vswitch for the Wireless AP). If you want to access the Internet, you need to use the wireless router. This article takes the home wireless network as an example, use a wireless Nic and a wireless router. TP-LINK WR541G 54M Wireless router and DELL 630M notebook, comes with Intel (R) PRO/Wireless 2200BG Network Connection 54M Wireless Network card.

1. Wireless LAN Settings

The current router settings are mostly set through the WEB. Because the router may not be able to use the wireless function before the correct settings are made, we connect to the router through the network cable; first, enter the default IP address of WR541G in the address bar of the browser, 192.168.1.1. The default IP addresses of the vro may be different. Therefore, you can find the default IP addresses in the vro or instructions.

Here, you need to note: when setting a router through the WEB, the IP address of the computer connected to the router must be set to the same gateway as the router; if the router IP address of the mouse is 192.168.1.1, you can set the IP address of the computer to 192.168.1.2 --- 192.168.1.255.

For computer IP address settings, you can set this way: when the computer is correctly installed with the NIC Driver, select control panel-network connection-local connection, select Internet protocol TCP/IP ), click properties -- select to use the following IP address; enter 192.168.1.2 --- any address between 192.168.1.255, enter 192.168.1.2 here, enter 255.255.255.0 as the subnet mask, and enter 192.168.1.1 as the default gateway.

Enter the IP address of the vro in the address bar of the browser and set 192.168.1.1 to enter the WEB configuration interface of the vro. Generally, the router requires the administrator password when entering the WEB Settings interface. For the first time, enter the original password as instructed. Enter the correct user name and password to go to the wireless LAN Settings page.

TP-LINK router setup and installation is simple, and cost-effective is also good, especially suitable for the family network; the mouse used a few TP-LINK router, I feel good. Besides, Chinese people must also support Chinese goods. If you only want to set up a vro, you only need to select the setting wizard and configure the network according to your Internet access mode to implement the routing function. For the Internet access method, please select according to your own situation. Here, we use the most common domestic ADSL virtual dial-up PPPoE dialing method as an example.

Select ADSL virtual dialing PPPoE), click Next, and enter your account name and password. If you do not know, please contact your local IP service provider. Click Next to enter the Wireless Settings interface, the TP-LINK is wireless by default open, because we this article mainly introduces Wireless Settings, so if the wireless function of this setting interface is not open, choose to open, click Next to complete vro settings. Because a new vro is set, the vro will be re-connected. If the router is started correctly and the running status on the interface is set, the current status of the vro should be correctly displayed. If the WAN port status shows an error, set an error for you. Set it again.

After the vro is correctly connected, if you want the following clients to conveniently configure the network, you can enable the DHCP service in the vro, the TCP/IP protocol for all computers in the LAN connected to the router is set to "automatically obtain the IP address", and the router can automatically configure the network for each machine. In this way, you do not need to specify IP addresses for each machine. Of course, you can also manually specify IP addresses for each computer when the DHCP service is enabled.

2. Wireless LAN Settings: Wireless Nic settings

First, correctly install the driver of the wireless network card, and then select control panel-network connection-select wireless network connection, right-click to select Properties. Select Configuration in the connection attribute of the wireless network adapter, select the AD Hoc channel in the attribute, and select 6 in the value. The value should be consistent with the value of the wireless frequency band set by the router, and click OK.

In general, the frequency band of the wireless network card does not need to be set, and the system will automatically search. The wireless network card of the mouse can automatically find the frequency band. Therefore, if you set a wireless route, the wireless network card cannot find the wireless network, which is usually the reason for the frequency band setting, follow the correct frequency band above.

After setting the surface, select Control Panel> network connection> double-click wireless network connection and select the wireless network connection status. In the correct case, the wireless network should be connected normally. If no connection is displayed in the wireless network connection status, click View wireless network, refresh the Network List, and click Connect after the system detects the available wireless network, you can complete the wireless network connection.

In fact, wireless LAN Settings are basically the same as wired website settings. The preceding settings can only be completed if you only set up a wireless network. The above article only introduces the connection between a computer and a wireless router. If multiple machines are connected, it is the same as the single-host setting. Because the DHCP service is set in the vro, you cannot specify an IP address to complete the network configuration of multiple machines. If you want to manually specify the IP address of each machine, you only need to specify the IP address in the NIC TCP/IP Settings. However, you must note that the IP address must be set in the same CIDR block as the vro, set the gateway and DNS to the IP address of the router.

◆ Wireless LAN Settings: if you cannot detect the wireless network in the network refresh list, check whether the wireless network in the wireless router is enabled and the wireless network card on the computer is enabled, whether the frequency band is set correctly.

◆ Wireless LAN Settings: to manually specify the IP address of the machine, you only need to set the gateway and DNS to the IP address of the router.

◆ Wireless LAN Settings: the wireless network has a certain transmission distance and can be normally connected only within the valid distance.