1, the replacement of solid state hard drive (SSD)
First turn off the computer, then remove the mobile battery (note: There are two batteries, the inside and together), unscrew the screws, open the back cover can be opened after the image:
Only need to take away the hard drive, remove the need to unscrew a screw, and then replace the solid State Drive (SSD) can be.
2, change the memory strip
Because there is only one slot in the T440 model's memory strip area, just unplug the original memory bar and replace it with new ones.
The specific disassembly steps are shown below:
Note: No configuration is required during the dress up process.
After the completion of the replacement need for the new installed solid state hard disk partition, after zoning because I unplugged the original hard drive, so need to reinstall an OS.
If the simple to dress up the memory is not necessary to do any configuration, direct dress up can be.