TL-WR340G wireless router settings 8 Steps

1 Connection

The China Telecom adsl moden network cable is directly connected to the wireless route, and then the wireless route has four network cable plug-ins, which can be used for four consecutive machines with Nic configurations. In addition, the wireless antenna can cover the room for 100 meters, in an outdoor 300 wireless network, machines using wireless local network cards can access the Internet wirelessly. Of course, data is the standard and ideal data in the best environment, rather than the actual test data ).

2. Route settings

After the adsl moden and the wireless route are connected, open the local wireless Nic to query the wireless network signal. At this time, the local Nic is successfully connected to the vro through the wireless network. The factory setting of this wireless route is ip: 192.168.1.1. Open ie, enter the ip address of the route directly, and enter the default username and password: admin and admin. The router setting interface is successfully displayed. Set the PPPoE dialing function of the route, enable the dhcp function of the route, enable the wireless network launch function, and record the dns address assigned by the route at this time.

3. Local client settings

After testing, this client can set the ip address and dns in two ways, one is to directly set the fixed ip address to 192.168.1. *, * the value is 2-, and then the dns is set to the route allocated, so that the Internet can be smoothly accessed. The other method is to automatically obtain the ip address and dns, you can also use the dhcp function of the route to allocate the response ip address and dns, and access the Internet smoothly.

4. bt Functions

Many people on the network have reported that wireless route access imposes great restrictions on bt. After testing, without modifying the route and other settings, bt queries the number of seeds and the download and upload speed, which are significantly different from those before using wireless routing. After querying the cause and solution on the Internet, one is to enable the route UPnP function, which has options in the route settings, and the other is to enable the windows xp UPnP function, this option is available in the add windows component-network, and finally in the bt settings, the network connection option contains "Allow UPnP automatic port ing". Enable this option, record the port used by bt, such as 17950, and add it to the virtual server in the route settings. At this time, theoretically, the problem of limits the connection and speed of the wireless route can be solved. However, after testing, the connection and speed of this bt connection were greatly improved compared with those before modification, but the speed difference was about 30 K compared with that of the direct local connection to adsl, that is, the peak value is 150 k/s.

5. http download speed

The http download speed is the same as that of the unused route. The peak value is 180 k/s, And the download speed is not reduced by the wireless network.

6. wireless network coverage

After testing, the data is stored in the same room, living room, And next room on the route respectively. The usage speed is the same as the network connection speed. I believe that the data in the toilet cannot be accessed through the Internet.

7. Problems

It is still a problem with bt. If you set a fixed ip address and dns to access the Internet, the bt connection is normal. However, if you use the routing dhcp function to automatically allocate the current ip address and dns, bt will never be connected to the seed, the download speed is 0. The problem has never been detected, and no solution has been found.

8. multiple computers share the Internet

Because there are no additional computers, this item cannot be tested, but I believe it should be okay. After all, as long as there are no problems with the settings of multiple computers, shared Internet access should not be a problem.

1. One-click secure connection broadband wireless router shopping guide
2. How to install and set up a wireless router