To teach you to use PS to adjust the scenery photos of the master class

In order to get a clear picture, the photographer used the depth of the technology, which is currently one of the most common North American photographers. That is, the fixed camera, by changing the Giolai on the same screen at different distance of the object focus shooting, and later synthesis of the same picture, so as to ensure that the picture of the object's clarity. The related processing software used by photographer Palacios is Helicon focus.

Related data: Palacios 6 exposure, each time 2 seconds; aperture F11;iso 100

Equipment: Pentax 645D with 55mm fixed Coke. Palacios also uses a tripod and locks the reflector to reduce vibration.

Although the F22 depth is farther, the Palacios believes that in some lenses, less than F13 aperture can cause some diffraction problems. So he generally uses f11-f13

The following is the original image, and the photographer says he hopes the late traces are not too serious. Let's see how he fixed it, a little bit longer, and ask everyone to sit down.

Open Raw, first look at the histogram, see where the exposure is not enough. After the simple adjustment of exposure, contrast, black/white, and the intelligent sharpening. The value he gives is a radius of 0.5, a number of 50, and retains as much detail as possible.

The next step is an approximate hand-drawn section, which uses a large number of masks. Out of personal preference, he reduced some of the water's blue to make the picture warmer.

The next step is saturation, as shown in the figure.

Then add a red mask to the flow, transparency 11%, blending mode for soft light. See here can not help but sigh foreigners really thin ...

Add a warm orange layer to the stone, transparency 63% (we do not copy when we operate, we need to adjust according to the actual situation. Also, the soft light mode.

In fact, the photographer has been almost satisfied, and later after consideration, in order to pursue a better effect of the establishment of a curve.

Add a mask of neutral gray color, and highlight/deepen the corresponding Light/dark part on the stone.

Adjust the curve of the local area again

Adjust the contrast of the local area

Draw the overall curve, transparency 29%. No masks this time.

A curve that pulls the brighter part of the screen

Adjust the contrast of the brighter part of the screen

The above is the PS to adjust the scenery photography Photo tutorial, I hope you like!

Category:

• PS Palette Tutorial