Totolink Wireless Relay Setup Tutorial

This article mainly introduces the Totolink wireless Relay Setup tutorial, the Totolink series of wireless router models are more, and different models of wireless routers between the settings page will be different. This article will use Totolink n600r V2 wireless Router As an example to demonstrate the introduction of Totolink Router relay settings tutorial, other models of the Totolink router, you can refer to the

method to set the.

Note the problem:

(1), wireless relay, is the wireless way, so that 2 wireless routers to establish a connection between the main role is to enlarge the wireless WiFi signal coverage.

(2), must ensure that the relayed WiFi signal, has completed the Internet settings, that is, the original router has completed the Internet settings, can be normal Internet.

(3), in this case, the previous router has been able to surf the internet, called the main router, the Totolink router, called the deputy router.

Totolink Wireless relay settings can be summed up to 3 steps: 1, modify the LAN port IP address 2, select system mode; 3, set up wireless relay; 4, check relay settings for success. The following is a detailed description of how these 4 steps are set up and what you need to be aware of when setting up.

Step one, modify LAN port IP address

Login to the Totolink router settings interface, click "Network Settings"--> click "LAN Port Settings"--> Modify the right "IP address"--> and then click "Application."

Modify the LAN port IP address of the Totolink router

LAN Port IP Address modification principle:

(1) If the IP address of the main router is: 192.168.0.1, then the IP address of the Totolink router needs to be changed to: 192.168.0.2

(2) If the IP address of the main router is: 192.168.1.1, then the IP address of the Totolink router needs to be changed to: 192.168.1.2

(3) If the IP address of the main router is: 192.168.2.1, then the IP address of the Totolink router needs to be changed to: 192.168.2.2

(4) If the IP address of the main router is: 192.168.3.1, then the IP address of the Totolink router needs to be changed to: 192.168.3.2

In this example, the main router is a Huawei Glory router, IP address is: 192.168.3.1, so here the Totolink router LAN port IP address, modified to: 192.168.3.2

Important NOTE:

You need to use the modified IP address to log back on to the settings page of the Totolink router. In this case, you need to enter 192.168.3.2 In the browser to open the Settings page.

The second step, select "System Mode"

Use the modified IP address (in this case: 192.168.3.2) to login to the Settings page, and then click "System Mode"--> on the right side: Relay mode--> Click "Apply".

Select Totolink's "system mode": Relay mode

Step three, set up a wireless relay

1, 2.4G Wireless relay settings

(1), click "2.4G Wireless Settings"--> Click "Relay Settings"--> Click on the right side of the "scan"--> in the scan results, select the WiFi signal need to be relayed (in this case: Momo)--> in the above "key" option, Enter the password for the relayed WiFi--> click "Connect".

Totolink Router Wireless relay settings

(2), click on "2.4G Wireless Settings"--> "Basic Settings"--> and then the "SSID", "Security Encryption", "key" set to be the same as the relayed WiFi.

Set the WiFi parameter of the Totolink to match the WiFi parameter of the main router

Warm tips:

That is, the WiFi name, encryption, and WiFi password in the secondary router (totolink) are completely set to coincide with the main router, so that you can unify the WiFi name and realize wireless roaming.

2, 5G Wireless relay settings

5G Wireless relay settings, in full accordance with the 2.4G wireless relay settings, please refer to the content described in the 2.4G Wireless relay settings above to set up, here is no longer introduced.

Step fourth, check that relay settings are successful

Click on the "2.4G Wireless Settings"--> "Wireless Status"--> view the "status" option under the "2.4G Relay Configuration" option on the right, and if the connection is successful, as shown in the following illustration, the wireless relay settings for the Totolink router are successful.

Check to see if the Totolink Wireless relay settings are successful

Summary of error points:

(1), Totolink router LAN port IP address modification error. Note that this is based on the IP address of your primary router to determine how to modify the LAN port IP address of the Totolink router, detailed modification principle, this chapter has been described in detail.

(2), the need to use the modified LAN port IP address, to be able to log back to the Totolink Router Settings page, please be sure to pay attention to this point.

(3), when setting up a wireless relay, the password fills in an error, causing the relay to be unsuccessful. You must enter the correct wifi password (the password for the relay WiFi signal) to be able to connect successfully.