Tp-link port Mapping Setting method encyclopedia

The current development of China's routing industry is very rapid, here we mainly for the Tp-link router port mapping, detailed to you, in the IE Address bar input "192.168.10.200" and "enter", in the pop-up Login dialog box to enter the default management username and password " Root "into the admin interface. and select "Basicconfig→pat" in the menu bar on the left side of the admin interface to enter the Tp-link Router Port Mapping Configuration dialog box. In the dialog box, click the "Add" button to add a new mapping item.

1. In the "Protocol" (Agreement) column, we select the protocol: TCP.

2. In the Interface (interface type) column, the default value is LAN, and we can also choose ATM1, ATM2, until ATM8. Here we choose ATM1 (do not select LAN, otherwise the map will not succeed).

3. "ServiceName" is used to indicate the category of the mapping and can be entered arbitrarily.

4. In the "PortNumber" (port number) column, fill in the port number we need 1433.

5. "Serveripaddress" means the private IP address of the computer on which the server is set up, both your server's current intranet IP. After the mapping project has been added, click Finish to complete the setup. Then select "Saverestart" in the left-hand menu bar, click the "Save" button to save the settings in the pop-up dialog box, and then click the "Restart" button to reboot the Adslmodem (note: Be sure to follow this order! Otherwise the configuration you just made will not be saved).

1. On the server computer that needs to be configured "Start", enter "telnet192.168.1.1" command and execute, enter the factory default password in the Password prompt box 1234 and enter the modem's main management interface.

2. Under the management interface, enter "15" into the "Advancedapplications" (advanced application) of the "Suaserversetup" dialog box, which is the PRESTIGE642R Tp-link The Router port mapping interface is set up.

3. Setting is very simple, first move the cursor to a blank item, and then fill in the left side of the intranet server to provide the service port number, and the right to fill in the intranet server IP address. The service port we need to open is the 1433,IP address assumed to be 192.168.1.2.

4. When you finish setting up this menu, in the PressentertoconfirmoresCtocancel and then press the "enter" key to store the set value.

in the address of IE, enter your router address, such as 192.168.1.1, carriage return. IE will pop-up windows require you to enter the router's login name and password Linksys the factory implied setting is, the login name is left blank (leaveitblank), the password is admin, and then click "OK" if the password is correct, IE will enter the Linksys Settings page, in the upper right corner, will find " Advanced "A column, click" Advanced "into" Advanced "a column, the second folder on the top left, you should be able to see" Forwarding "folder, click" Forwarding ", After entering the portforwarding, we can set up the Tp-link router port mapping. The

1 gives the Tp-link router port map a random name.

2. Select the TCP port, and the port number is 1433.

3. Fill in the intranet IP address of your server computer, for example if you get an intranet IP that is 192.168.1.100, just fill in the 4th grid with 100. And then tick. Finally, click "APPLY" to save it. So, Tp-link The router port mapping image is complete.