Tp-link router VPN How to set

Tp-link Router VPN setup method

After entering the QVM330 router, click "VPN Virtual path private network"---"Gateway to Gateway settings" set a tunnel name as shown:

Set up VPN remote gateway authentication IP address. Here is the need to fill in B factory IP address.

Common key and Bluetooth mobile phone and Bluetooth mobile phone data when the same password is the same meaning.

OK after setting. The "Current VPN status" is seen as shown in the picture showing that the router of factory A has been routed to the B plant successfully.

But only a factory users access to the B factory data. In turn, Factory B is inaccessible. That requires the B factory router also set the dial to a factory. The method is the same as the above method. Just the IP address is not the same. As shown in figure:

Two routers can realize the data transfer between two factories by mutual pulling VPN. The network of two plants is like a LAN.