Tp-link Hyfi Intelligent Wireless router How to set up

tp-link Hyfi Intelligent Wireless Router Setup first step, Hyfi router and extender registration

1, the Hyfi router and extender plug in the power outlet.

Plug the Hyfi router and extender into the socket

2, when the Hyfi router's LED is often bright, press the CONFIG key, the indicator light will flash;

Press the config key on the Hyfi router

3, 2 minutes to press the Extender Config key, the Extender press the CONFIG key after the indicator light flash.

Press the config key on the Hyfi extender within 2 minutes

4, approximately 30 seconds later the Hyfi router and extender LEDs are all turned on, indicating successful registration.

After approximately 30 seconds, the Hyfi router and extender LEDs become illuminated steady

Tp-link Hyfi Intelligent Wireless Router setup Step two, Hyfi router connection

1, telephone line Internet: users need to prepare 2 network cable, a network cable used to connect the ADSL Modem (cat) and Hyfi Router WAN interface; Another network cable is used to connect the LAN interface between the computer and the Hyfi router.

The correct connection diagram of the Hyfi router when the telephone line is connected to the Internet

2, Optical brazing: Users need to prepare 2 network cable, one of the network cable used to connect the light cat and the Hyfi router WAN interface, another network cable to connect the computer and router LAN interface.

The correct connection diagram of the Hyfi router when the optical brazing is connected to the Internet

3, network cable households: users need to prepare 1 network cable, the broadband operators to provide broadband network cable inserted in the WAN interface Hyfi router, and then the preparation of this network cable, one connected to the computer, the other end of the LAN interface to connect the Hyfi router.

The correct connection diagram of Hyfi router when broadband network cable is connected to the Internet