Tp-link tl-wvr300 Edition wireless router manual setup

Not long ago, the discovery of a store network failure, the cashier after the reset found still not able to surf the internet, but also need me to run a trip to solve this problem, I said that the premise is purposeful.

Objective:
Discover LAN port connection all-in-one machine, and then WAN Port connection can access the network, found that wireless any configuration can be online, which may be now the wireless router is more humane it, you think of all with you into consideration, you just need to plug on the Internet, very convenient, this is a bit similar to the light cat , the previous light cat needs to dial, and now it is very easy to put on, directly plugged in can be online

LAN port connection All-in-one, WAN Port connection accessible network

Find Internet access available

Modify the wireless router management account

Wireless Router configuration Want wizard

Set the Internet IP address of the WAN port to dynamic acquisition

Set Wireless WiFi password

Configuration preview

Manually set the management IP address, The default is 192.168.1.1, I would like to change to 192.168.0.1, usually the case is set, I generally go to the store before it is so set up to take, generally not connected WAN port, directly connected LAN port configuration, I have been connected here, can only continue

A conflict was found and could not be modified successfully


Before I modify the LAN port IP address, I'll check the IP address information of the WAN port IP automatically.

Then I will change the IP address of a network segment, such as this configuration is very small, it is not a problem

Now the management IP address has been changed.

At this time your computer must need to manually configure the IP address to access the Internet, for example:

Probably is such a process, relatively simple, why to do so, is a habit of correction, grope for experience it

Tp-link tl-wvr300 Edition wireless router manual setup