tp-link wr740n Wireless Router WDS Bridging method
The first step: first use the mobile phone to connect the superior router WiFi, get the IP address. For example: 192.168.0.103. Remember it first!
Landing their own Tp-link wr740n wireless router, click the "Network Parameters"->"lan Port Settings", the LAN address set to 192.168.0.107 after the point to save, to prevent conflict with the main router.
Important: Click "DHCP Server"->"DHC server settings to set the address pool start address to 192.168.0.200 set address pool end address to 192. 168.0.220, the gateway is set to: 192.168.0.1, complete the superior router's preferred DNS server and standby DNS server, save. Here does not fill out the DNS server can not access the Internet! I've tried this a few times!
Click on the "Wireless Settings"->"basic settings"ssid to fill them casually. "
(Do not use Chinese, some routers relay does not support), Can be the same without the same as the ancestor routing SSID (the same is the advantage of the SSID that you can roam seamlessly when you move up the stairs, and when you walk downstairs, it automatically correlates to a more powerful route upstairs, but you can't feel it because it's the same SSID.) Relay successfully you should be able to surf the web and can board two routers at the same time!
The following three parameters: (wireless mode, band bandwidth, channel) to and the superior router must be consistent!
(Wireless channel generally preferred to choose 1,6,11 three channels, because these three channels in the 2.4G band can make full use of bandwidth, now around the no line by more, everyone in rob these three channels so are slow, this is why push the 5G router reason. )
But this can only be the same as the superior router channel. Here whatever it is. Turn on the wireless feature, turn on the SSID broadcast, and turn on the three of WDS hooks.
Click on the scan, get the AP list to find the ancestor of the router's SSID, click on the right side of the "Connection" button, will return to the previous interface, directly fill in the superior route of the WiFi password and save points. If the parent route has WDS or bridge enabled, turn it off or the WDS feature will not work!
Finally, in order to secure their own routers to encrypt.
OK, all the operations are complete, restart the router. After the restart, you can surf the internet! Look at the final effect chart.