Application background
In environments of different areas, the requirements for router signal transmission intensity are different. When the signal quality is guaranteed, the greater the area (obstacle), the higher the signal strength requirement. In a small environment, the signal intensity is relatively small, which can save energy, reduce the possibility of network interference, and reduce the radiation.
This topic describes how to adjust the signal of a vro.
Log on to the vro management page and clickApplication ManagementTo enter the application center, as shown in the following figure:
Find signal adjustment and clickEnter, As follows:
Adjust the signal strength in combination with your environment (the default signal strength is Enhanced):
Signal adjustment reference table:
Intensity type
|
Intensity value
|
Applicable environment
|
Energy saving
|
25%
|
Single room or empty environment with a radius of 10 meters
|
General
|
50%
|
One room and one hall, separated by a wall
|
Enhanced
|
100%
|
Common home environments, separated by two walls
|
Note:This table is for reference only.
So far, signal adjustment is complete.
Answer
After the signal is adjusted, the intensity does not change?
A: If there are many obstacles in the environment and the signal attenuation is high, adjusting the signal strength cannot solve the problem at all. You need to consider using the wireless extender to expand the signal.