Tplink Mini Router AP mode how to set

Tplink Mini Router AP Mode Setting method

The factory-State mini router defaults to AP mode, Plug and Play, but wireless name and encryption are not set, network security is low, so need to set. Common setup methods are as follows:

1, after the mini router power, do not connect the front-end LAN network cable to the mini router.

Note: If the device appearance has a mode switch, the Confirm mode switch has been clicked to AP mode.

2, the terminal through the wired or wireless mode (mini router default wireless signal name is: tp-link_xxxxxx (x for router bottom label labeled MAC address after six bits) to connect to the router.

3, open the Computer browser, in the Address bar to enter the mini router's management address and login password, as follows:

Note:

[1] Some mini routers are logged in by the domain name tplogin.cn, whichever is the management address labeled at the bottom of the router.

[2] Some mini routers use the default login username or password admin login.

You may be concerned about the problem: login can not manage the interface how to do?

4, into the management interface, click the Setup Wizard > Next, confirm or select the working mode for AP mode, as follows:

5, modify SSID (wireless signal name), in the location of the PSK password set the wireless password, click Next, as follows:

6, after the setup, restart the router, as follows:

7, the front-end network and router cable interface connection, as follows:

The computer connection changes the wireless signal (Zhangsan), if the normal access to the Internet, the AP mode Setup success. The AP mode settings are now complete. Other wireless terminals connect to the Internet with a set of wireless signals.