Tplink Tl-wa830re How do I extend the amplification wireless signal?

Application Introduction

Wireless Extender is a Wi-Fi signal amplifier, it is the role of your home, office and other environments have but the weak wireless Wi-Fi to enhance the amplification, so that each corner has a strong signal. The following figure:

Extender use effect-magnify existing signal

The purpose of using an Extender is to enhance the amplification of existing wireless signals, so before setting up you must know which signal you are going to magnify and the wireless password for this signal .

This article describes how to enhance the amplification of wireless signals using the TL-WA830E wireless extender.

Set Method

When you purchase the Extender, the Extender is in the factory state, directly plugged in is not able to enlarge the Wi-Fi signal, you need to set the Extender to enlarge the wireless signal.

Set up a process

1. Plug the extender into the power outlet near the wireless router;

2, mobile phone near the extender, connected to the extension of the default wireless signal tp-link_re_xxxx ;

If the initial use, the search does not have this default signal, please reset the Extender .

3, open the mobile phone Web browser , in the address bar input tplogin.cn or 192.168.1.253 login interface (first set, the mobile phone will automatically pop-up login page).

4, in accordance with the guidance set, scan to the signal you want to expand, enter the signal password, extended success;

5, the Extender inserted in the previous weak signal position, according to the status of the indicator to adjust the placement position, set the completion.

When the settings are successful, the Extender LEDs are orange or green, emitting the same signal as the primary router.

Detailed Setup Instructions

Tl-wa830re supports the following two ways (tools) to set up, you can refer to the most convenient way:

Set up guidance articles

Attention matters

When you first purchase to an Extender, it is recommended that you pay attention to the following items:

1, the factory state, the Extender will issue the name of tp-link_re_xxxx Wi-Fi signal, the phone must be connected to the signal to login settings extender.

2, if the browser address bar input tplogin.cn after the page loading is slow, may be the browser's own detection mechanism caused by slow (such as UC Browser), please manually enter 192.168.1.253 login.

3, the setup completes, the Extender's tp-link_re_xxxx signal disappears, at this time the extender launches the signal and the main signal is consistent , really plays the amplification signal the function.