tplink845n routers how to restore factory settings

tplink845n Router Restore factory settings: Press and hold the reset button to reset

1, in the Tp-link tl-wr845n router, next to the power socket, there is a reset button: Reset, as shown in the following figure. Please now on your own tl-wr845n router, find this reset button.

2, the first Tp-link tl-wr845n router power plug, and then hold down the reset button for 10 seconds or so time. Then observe the LEDs on the tl-wr845n router, indicating that the tl-wr845n router has been restored to its factory settings when all LEDs are off and flashing again, and the Reset reset button can be released.

tplink845n Router restore factory settings: Login to Settings interface reset

1, login to the Setup interface

V1, V2 version tl-wr845n router

Enter:192.168.1.1--> "username" and "password" in the browser: admin, login to setup interface

V3, V4 version tl-wr845n router

Enter 192.168.1.1--> in the browser to enter the administrator password and log in to the settings interface.

Important NOTE:

(1), Tp-link tl-wr845n router currently has V1, V2, V3, V4 a total of 4 versions. The hardware version of the Tp-link router can be found in the bottom tab, as shown in the following figure.

(2), V1, V2 version of the tl-wr845n router, the default user name, the default password are: admin.

(3), V3, V4 version of the tl-wr845n router, there is no default username and password. Turn on the 192.168.1.1 prompt to enter the "Administrator password" is the first time you set up this tl-wr845n router, created by the user himself.

If you forget the administrator password, only use the content described in Method 1 to tl-wr845n the router to restore the factory settings.

2, Restore factory settings

In the TL-WR845N router setup interface, click "System Tools"--> "Restore factory Settings"--> in the open page, click the "Restore Factory Settings" button, as shown in the following figure.