If you forget the management password for your hard disk recorder, please reset it through the following process:
The reset process is as follows: Connect the NVR with the monitor-> click "Forget password" in the login interface-> get password recovery string-> provide our technical support-> get temporary password-> login nvr-> reset Password.
The following is a detailed description of how to handle the forgotten NVR management password.
1
, connect the DVR with the monitor.
Use VGA or HDMI cable to connect the NVR and monitor into the GUI interface of NVR:
2
, click Forget password
After entering NVR GUI login interface, click
Forget password? :
3
, record password recovery string
Keep in mind the password recovery string that you obtained, as shown in the following figure:
Note: After recording the password recovery string, do not click the forgotten password again.
4
, contact technical support to obtain a temporary password
Password recovery string Effective time is 2 hours, please contact 400-8863-400, our offices or online customer service, Division I will be based on the recovery string to provide you with temporary password.
Contact Tel:
400-8863-400
5
, Login
NVR
to reset the login password
Use the temporary login password to login to the NVR Admin interface and reset the NVR login password:
At this point, the NVR password reset is complete.