Trouble shooting of transmission belt shedding of inkjet printer

　　An ink-jet printer has been used normally, recently moved the ground once, after the printer post is completed, the print head can not automatically move, open the printer disk cover, found that the printer's transmission belt is very loose, how to solve?

The problem should be because you move the printer, the normal shutdown printer, resulting in the print head does not normal movement to the right fixed position, moving in the vibration, resulting in the printer transmission belt from the guide gear off, it is recommended that you manually reinstall the transmission belt to the steering gear, the general problem can be solved. The specific method is as follows: Open the printer body cover, the printer left drive belt placed in the correct position on the power gear, the right hand stretch transmission conveyor belt, the transmission belt began gradually around the direction of the gear and in the middle position, transmission belt reset, with the hands of the print head, if you can move normally, the description can be normal to Used, in addition to the installation of a drive belt, the need to restart the print head cold, so as to avoid the problem of print image dislocation, the printer and computer connection, start the printer, double-click My Computer/Control Panel/printer and fax machine , right-click the corresponding printer icon, select Printing Preferences, Click Maintenance/Print head alignment, general issues can be resolved.