[Typical configuration] AR18 Broadband Router VRRP Application

Source: Internet
Author: User

Networking and configuration steps
1.1typical vrrp applications
2.8.1 application description
To improve the availability and reliability of your network, you can deploy two SOHO routers for you and use VRRP features of the VRP platform to ensure the robustness of the network. Based on the customer's actual situation, there can be different SOHO router combinations to achieve networking. The VRRP deployment can be used to route user data from another ISP when the ISP line fails; even if a SOHO router fails due to force majeure, the entire network can communicate with the external network continuously.

Network Planning: the lan pc obtains the IP address through DHCP. The VRRP and DHCP Server are configured for the AR 18-32 and 3Com 3031, the IP address range is 10.11.x.x/16, and the gateway is VRRP vro10.10.11.0.3. AR 18-32 ethernet address 10.11.0.1, 3Com 3031 ethernet address 10.11.0.2.

VRRP: priority is set to 3Com 3031. Priority is set to 120. Priority is set to 100 for AR 18-32. When the ADSL line fails, priority is reduced by 50, in this way, when the ADSL line of 3Com 3031 is faulty, the priority is 120-70 = 50, which is 100 lower than the priority of AR 18-32. AR 18-32 can be used as the Master node to Route packets.

2.8.2 networking Diagram

1.1.3 considerations
Configure a router to access the INTERNET
Configure VRRP ...... AR 18-32
# Configuring Ethernet interfaces
[1832]interface Ethernet 1/0
[1832-Ethernet1/0]ip address 10.11.0.1 16
# Configure VRRP Service
[1832-Ethernet1/0]vrrp vrid 10 virtual-ip 10.11.0.3
[1832-Ethernet1/0]vrrp vrid 10 priority 100
# VRRP monitoring of ADSL lines
[1832-Ethernet1/0]vrrp vrid 10 track atm 2/0 reduced 50
# Configuring the DHCP service
[1832]dhcp server ip-pool vrrp
[1832-dhcp-pool-vrrp]network 10.11.0.0 mask 255.255.0.0
[1832-dhcp-pool-vrrp]gateway-list 10.11.0.3
[1832-dhcp-pool-vrrp]dns-list 10.72.66.36 10.72.66.37
[1832-dhcp-pool-vrrp]domain-name huawei-3com.com
[1832-dhcp-pool-vrrp]nbns-list 10.153.0.11
# Configuring NAT service
[1832]acl number 3000
[1832-acl-adv-3000]rule 0 permit ip source 10.11.0.0 0.0.255.255
[1832]interface Dialer 0
[1832-Dialer0]nat outbound 3000
Configure VRRP ...... 3Com 3031
# Configuring Ethernet interfaces
[3031]interface Ethernet 1/0
[3031-Ethernet1/0]ip address 10.11.0.2 16
# Configure VRRP Service
[3031-Ethernet1/0]vrrp vrid 10 virtual-ip 10.11.0.3
[3031-Ethernet1/0]vrrp vrid 10 priority 120
# VRRP monitoring of ADSL lines
[3031-Ethernet1/0]vrrp vrid 10 track atm 2/0 reduced 50
# Configuring the DHCP service
[3031]dhcp server ip-pool vrrp
[3031-dhcp-pool-vrrp]network 10.11.0.0 mask 255.255.0.0
[3031-dhcp-pool-vrrp]gateway-list 10.11.0.3
[3031-dhcp-pool-vrrp]dns-list 10.72.66.36 10.72.66.37
[3031-dhcp-pool-vrrp]domain-name huawei-3com.com
[3031-dhcp-pool-vrrp]nbns-list 10.153.0.11
# Configuring NAT service
[3031]acl number 3000
[3031-acl-adv-3000]rule 0 permit ip source 10.11.0.0 0.0.255.255
[3031]interface Dialer 0
[3031-Dialer0]nat outbound 3000
Verify that the VRRP status is normal after Configuration
<3031>dis vrrp
 Virtual Ip Ping : Disable
  Ethernet1/0 | Virtual Router 10
 state : Master
 Virtual IP : 10.11.0.3
Config Priority : 120
  Run Priority : 120
Preempt : YES  Delay Time : 0
 Timer : 1
 Auth Type : NONE
Track IF : Atm2/0  Priority reduced : 50
 
<1832>dis vrrp
 Virtual Ip Ping : Disable
  Ethernet1/0 | Virtual Router 10
 state : Backup
 Virtual IP : 10.11.0.3
Config Priority : 100
  Run Priority : 100
Preempt : YES  Delay Time : 0
 Timer : 1
 Auth Type : NONE
Track IF : Atm2/0  Priority reduced : 50
VRRP status after ADSL line failure
<3031>dis vrrp
 Virtual Ip Ping : Disable
  Ethernet1/0 | Virtual Router 10
 state : Backup
 Virtual IP : 10.11.0.3
Config Priority : 120
  Run Priority : 70
Preempt : YES  Delay Time : 0
 Timer : 1
 Auth Type : NONE
Track IF : Atm2/0  Priority reduced : 50
<1832>dis vrrp
 Virtual Ip Ping : Disable
  Ethernet1/0 | Virtual Router 10
 state : Master
 Virtual IP : 10.11.0.3
Config Priority : 100
  Run Priority : 100
Preempt : YES  Delay Time : 0
 Timer : 1
 Auth Type : NONE
Track IF : Atm2/0  Priority reduced : 50
Configuration instructions
Currently, VRRP does not support dialer virtual interfaces. Therefore, we recommend that you configure atm oam F5 LOOP signaling detection. For more information, see the ADSL configuration document.
Interface Atm2/0.1 p2p
Atm-link check
Pvc 1/35
Oam frequency 10
Map bridge Virtual-Ethernet0

Related Articles]

  • [Typical configuration] IPOEOA of AR18 Broadband Router ADSL Application
  • [Typical configuration] Application of DVPN in AR18 Broadband Router
  • [Typical configuration] AR18 Broadband Router NAT + QoS typical application and configuration

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.