Ubuntu kylin18 install nvidia driver

These days the system is going to be tossing and dying, the cause of things is like this.

The OLED screen has been debugged for the last two days before this incident. I do my own adapter board, 1.3 inch 30-pin FPC interface.

Because there is no use of FPC dedicated adapter, resulting in special difficulties in welding, and finally sacrificed two OLED (in fact, not completely sacrificed),

Make a good two adapter plates. Neither piece is perfect, but it can be used. This thing and the 0.96x axis has two offsets, need to change the next program,

But I did not control the hardware when I welded it.

(This picture is the last debug, the following two lines can not be displayed, maybe the hardware is not welded well)

suddenly one day in the Deepin under the code, and want to debug this screen.

At that time remember Deepin in the update, I am ready to shut down the time, click on the next to see the update and then it has been turned round, waiting for a while it is still updated,

I made a foolish decision. I shut down directly, I thought it was windows under the installation failure is nothing. But this update is to update the kernel.

Then went to Windows debugging good screen, went to eat, and so I came back into the deepin when the confused forced. Deepin, Deepin has a high-level boot, can use the previous kernel,

But I tried to use the kernel before I could get in. But finally entered the REC, quickly said Deepin working directory file copy down.

This is the beginning of my machine toss.

Dell Inspiron 7559

I5-6300hq

HD Graphics 530+GTX 960M

12GB

128g+500g

I originally was 15.5 of the system, the update is 15.6, and then I went to the official website live, finally this live loaded into the U disk and rec, and can not operate the original operating system apt dpkg, the following problems are:

Re-install the system in a wrong step. Deepin always say that when it's time to install a cup of coffee, I don't know how many cups of coffee I've been drinking.

I think maybe I'm not too understanding Deepin this rec bar, anyway I later installed ubunut into REC, directly can single user login into the pure command line interface to make any changes.

Then there is no way to download 15.6 of the system, in the middle and to teach students how to remotely connect the Raspberry Pi, during which I mirrored a copy to his reload system.

Running back, he installed me to give it the face WiFi, send ssh to generate the next Key,rasp-config interface to solve the problem.

Then I started to install the system, and I found the 15.6 was much faster than 15.5. Why do I remember a lot faster? (Before this thing, the last time Deepin should have a semester)

Because after countless attempts to 15.6 I have also installed 15.5, hey said more is tears.

The default installed 15.6 can be directly into the system, the resolution of the correct brightness of anything can be adjusted. However, OpenGL cannot be used.

I installed the OpenGL package or not, it is still a graphics card problem.

15.6 can also be modified when the quiet splash Nomodeset (this computer installed Linux must be changed here, or the start of the direct freezing screen), after entering the system resolution is correct, but the brightness is not adjustable, HDMI is not output.

I then made the following attempt:

1. Using the default Driver manager, you can choose Intel,nouveau,bumblebee three drivers, the first two can be started, but there are problems. Have to try the closed source drive plus Bumblebee.

And when I was 15.5, I was faking it. This driver, Nvidia closed source drive plus Bumblebee, the default set display, Optirun open application alone display. Actually I used to show very little.

This attempt is unsuccessful, anyway, after the update kernel is 4.15, the computer seems to be unable to use Bumbbee, and later I put on the ubunt also stuck dead.

2. Using the Deepin Community Post method

Http://wiki.deepin.org/wiki/Deepin%E5%AE%89%E8%A3%85%E6%9C%80%E6%96%B0NVIDIA%E9%A9%B1%E5%8A%A8

I vaguely remember the last time I might have been such a good outfit, but this time or death is not, it is to start the card to die

3. Using the Deepin Wiki method

Http://wiki.deepin.org/wiki/%E6%98%BE%E5%8D%A1

See this sentenceacpi_osi=! 我想起来之前好像特地进过wiki里面说的bumblebee官方帖子，找到过和我电脑很接近的配置，根据他反馈修改过grub

Inside of here. But certainly not the same as I did before, I turned the wiki version of the history, found that the original isacpi_osi=! acpi_osi="Windows 2009" 然后bumblebee里面还有

　　　acpi_osi="!Windows 2015" 。看到这你肯定明白了，我对这三种以及上面2.3方法都进行过排列组合，每失败一次就装一次系统。注意这里面装闭源驱动又命令行，还有官网下载.run驱动，

　　　我尝试过384 390 396都不行，而且失败次数肯定比直接的组合数多。

　　　deepin之前给我体会是

Screen Qing Qi, with very cool, there are Tim, there are chrome, commonly used are. That's why I've been loading the system over and over again.

Finally I found that as long as the bumblebee can enter the system, but open-source N-card driver and the Intel set-up driver are used to have problems, such as the video card one card, the picture torn.

Obsessive-compulsive disorder is my wall separation, I went to install 15.5, 15.5 good ah, suddenly I under the official website driver installed, and then install common software, used. The hands of the cheap update, TTM and upgrade 15. 6 ....

Finally I tried another native Linux distribution, Ubuntu Kylin. It's just like win10, it doesn't have a different experience.

I've only been there once. Ubunt Kylin solved the video card problem, although the middle card is dead, but into the rec deleted bumblebee OK into the system:

When booting into grub, choose Rec Press E to edit the RO recovery nomodeset to RW single init=/bin/bash that is, read and write permission to log in.

You may not believe it, ubuntu18 only need point Drive management, additional drivers, use of closed source drive, restart the finished child

I tried the X server setting to switch to the Intel graphics card, but still the screen tearing phenomenon, and then I changed to n card, but I think it is not a waste of open, and installed Bumblebee, got and jammed

The Rec deleted the instant refreshing, the last is to open N card bar

End of the two-day system installed

Finally, the Ukylin diagram:

(Cut all two screens haha)

N Card Service Setup software

Ubuntu in the video card here to do better than Deepin, compile all of a sudden, deein to compile, also tried to deepin with Ubuntu, but the technology is not in place, the whole bad,

Still installed U ' kylin, with or can, get back the feeling of Windows

Write so long an article, but humorous is so two, is not digress

Ubuntu kylin18 install nvidia driver