UG Drawing software appears CFI error can not save how to do?

In the process of using UG software drawing, sometimes the drawing files can not be saved; When encountered this situation, if not handled well, it is necessary to from the preservation of that step back to design, in this experience, to explain to everyone I encountered in the UG drawing files can not be saved when the solution.

1, in the use of UG9.0 for mold design, after the design of the mold into the hole, in the execution of the Save, it appears: Modeler error: Frustrum in the unexpected file access error, as shown in Figure 1:

2, when the modeler error occurred, I used the Remove parameter command, first remove the previous steps of the drawing, as shown in Figure 2:

3, when the part of the implementation of the parameters, and then save again, but there is a hint: the error has been returned to the wrong error: Fr_psmark received a CFI error when opening the file, as shown in Figure 3:

4, to this if you want to use the conventional method to save this image is not possible! You can only save the current graphic by exporting it! Execute file-Export-x_t format (also can be stp,x-t and STP are two commonly used entity export formats.) ) as shown in Figure 4:

5. Open all the layers and display all the previously hidden drawings, then select all the parts to perform the export operation for them, as shown in Figure 5:

6. Select the file path for the exported file and specify a filename; (the export path and file name must be clear, otherwise you will not find the image file after export); Figure 6 shows:

Summary: When encountered can not save the map, do not be depressed, because the anger is not helpful, the reason is not to save the situation, often because the designer in the process of drawing and the computer's own configuration has a relationship! After a problem, find a solution