UltraEdit How to register activation

Method/Step

2. Turn off the network connection (or unplug the cable directly).

4. Open the UltraEdit software, and a moment will appear prompting you to use a trial version of the window. For example, click "Register".

6. Fill in the License ID and password. License ID can be arbitrarily filled out, but according to experience, we recommend that you do not enter the letter, all numbers, password is also. , please click "Activate" when you are finished.

8. Wait a moment (during this time, the software will be stuck, or the message "no response", do not control it, wait a moment to pop up the information), pop up the "Offline activation" window. , click "Activate Offline".

10. With the interface shown, you can see that two user codes have been generated. Fill in the License ID and password.

12. Open the UltraEdit keygen downloaded from the Internet. Address is Http://pan.baidu.com/s/1gdlCFgJ

14. Download it to unzip and open the interface like.

16. The user code 1 and the user code 2 are copied and pasted into user Code1 and users Code2. Pay attention to the corresponding order, don't paste the wrong. then click Generate.

18. After clicking Generate, two verification codes are generated.

20. Copy and paste the two verification codes into the verification Code 1 and the Verification Code 2, then click "Activate".

22. 11

    Wait a moment (the process will be a bit slow, be patient for a while) and pop up the "register/Activate Success" dialog box. This successfully registers the UltraEdit, even if the network is turned on, it will not fail to register.

UltraEdit How to register activation