Upgrade winxp usb to USB. (You still need to import USB)

Today, I upgraded my computer USB to USB. Congratulations.

90% of people are now using USB, and those who are already using USB can skip this article.Article.

Your computer is running 4 3.0e 3000Hz .. The motherboard is the motherboard of MSI 945pl neo5. The configuration is not low now. However, USB 1.1 in the house has been used to check a lot of information on the Internet for more than two months.

Download the universal USB driver at the beginning.

Later, the driver genie 2008 was downloaded to update the latest driver.Program, Or not.

This problem is strange. I thought I could not find the cause of my fault. By accident, I found that there was no USB controller in my USB controller.

Step by step, I started online research and found that many people on the Internet said that XP SP2 and some systems are not compatible with USB2.0, And then I studied how to uninstall SP2.

Rummaging through the Cabinet and find the motherboard driver from the first 2000 discs. After searching for three days, I was excited and put it into the optical drive. I found that there was a directory of USB2.0 2. I went in and saw it as HTML. I clicked it and went to the official Microsoft website, I searched for nothing. Khan ..

Finally, the bid system, that is, from the early installation to the evening, 5 times the system, 2000 XP SP2 2003 XP SP3, deliberately went out to buy the XP SP3 CD.

I tried ghost installation and not ghost installation. Not yet. Silent for a long time.

Suddenly thought of it, and finally there is a chance to brush the bios, braving the risk of bad board brush, download a Microstar 945pl neo5 BIOS refresh program.

Enter the dos and refresh the program with luck (Note: The format is [refresh the program (Space) refresh the BIOS file]). At the beginning, you can directly run the Help Command.

Restart and USB is released. It has been around for more than two years .. Since the speed and copy are liberated, my mobile hard drive is finally useful. Amen.

Most people now buy new BIOS for the motherboard of the computer, and there is no such problem, but I believe there are still brothers still worried about USB1.1.

Therefore, the solution provided by [Peng's technical blog] is to refresh the BIOS of your own motherboard. Pay attention to the brand and model of your motherboard. Also, the BIOS may be damaged. Please be careful.

Over ~~~~~~~~~