USB disk is not a virtual machine to identify the problem how to do?

Today in the virtual machine to insert a U disk did not have any reflection, and in the physical machine is installed U disk drive display, open the virtual machine BIOS boot, also did not see the USB option. The problem is that the USB disk is not recognized by the virtual machine, so how can we solve this problem?

USB disk is not recognized by the virtual machine to resolve the steps:

1, we first run the virtual machine, and then view the "Toolbar" – "VM" – "Settings" – "Hardware", check the "Device" column has no "USB Controller", if not add a. If so, then we continue to click on it and see if all the right side is checked, as shown in the following figure:

If the third item is gray, there is no way to check, that is because the USB port is not enough, in other virtual machine system used up, at this time we can open a other virtual machine system, by setting the inside "USB Controller" Change to "remove", Then in the original virtual machine system, re-add to build a USB Controller, and the three options are checked, and finally click OK, reboot the system!

2, restart the system if the virtual machine prompts: "Host USB device connections disabled." The detailed hints are as follows:

The connection to the VMware USB arbitration Service is unsuccessful. Please check the status of this service in the Microsoft Management Console.

The reason is that "VMware USB arbitration Service" is not turned on on the native system

Workaround: In the Win7 operating system, right click on the computer, click the Management-> service and Application-> service, find "VMware USB Arbitration Service", right-click, start. As shown in the following illustration:

3, restart the virtual operating system again, we can see the desktop in the lower right corner of the USB logo, as shown in the following image:

Finally, we use the mouse to click on this logo, and then select "Connect", insert a U disk can be identified. As shown in the following illustration:

After the above text detailed description, if you are in accordance with the steps we have introduced to operate, I believe that your U disk will not be identified by the virtual machine can be quickly resolved, the friends who have this problem may wish to try our introduction of the solution, I hope that we will be able to bring help.