USB disk to make the Startup disk method

USB disk to make the Startup disk method

Use a U disk to start easy disk is not very easy, first look at whether the motherboard support, U disk support. U disk if supported, then you can try this simple and universal USB disk to make the Startup disk method:

The first step, first of all, your motherboard support U disk startup, generally more than 815 motherboards are supported (not supported by the brush BIOS will generally support, but may be bad brush). In the USB port plug a U disk, enable the motherboard for USB support. If you don't understand, set the BIOS to the default value, the first boot to USB-HDD, save and restart.

Second step, import boot information (there are two ways):

1. Use a special Format tool to format (General U disk with the software has), select the Boot Disk option;

2. After the flash disk inserted, use the CD-ROM boot disk or floppy boot disk boot, into the DOS, into each disk (except the C disk) to see the U disk is assigned to the letter and remember, because the following is useful. Generally the smallest is it (because at this time the U disk is not divided in the last disk, but in addition to the C disk random allocation of a letter). Enter the drive letter (must enter the only line), if you can access to the flash disk in DOS, in the CD-ROM drive letter, with Format x:/s or format x:/q/s or sys x: (x on behalf of the U disk letter) format can be. General format x:/s best, most stable, u disk will be formatted into FAT format and installed on the DOS system, you can use to guide the system into DOS exercises.

Step three, modify the bootstrap information

Now you can guide, find a 98 boot disk, the inside of all the files including hidden files are copied to the Flash disk, overwriting duplicate files.

Locate the Autoexec.bat file, open it in Notepad, and find the line at the beginning of path, plus the REM command in front of the path, and note that there is a space after rem.

Find Setramd.bat file, open with Notepad, find the "A:FINDRAMD" line, remove "A:" Change it to "FINDRAMD". Save!

Fourth step, you can add other tools

You can also add some system maintenance tools, such as Ghost, Pqmagic8 dos, Smartdrv.exe, format,xcopy and other tools.

Fifth step, the use of U disk

The first boot setting for the BIOS setting is USB-HDD. Of course, enable the motherboard for USB support first. If you don't understand, set the BIOS to default and set the BIOS's first boot setting to USB-HDD.

In this way, the launch disk made with U disk is completed. But there are some problems with u disk boot, u disk storage medium and hard disk, so read faster than hard drive much slower. If the USB disk quality is almost, the reading speed is even more slow. U disk for the computer is a "input", when you start the computer, it needs a variety of equipment to assist, so use which device has a sequence, to queue, to have a program to set such order, so have a "BIOS" basic input and output system, fundamental input Output System. The Boot Power Boot BIOS (which sets the boot sequence of the motherboard external devices) starts the hardware operating system loader in a set order. As can be seen from the above, if the U disk in the BIOS as the first boot hardware, then it can do a lot of things, including: U disk installation system, maintenance repair and so on ...! The BIOS recognizes the following: Driver (ZIP)/Floppy (FDD)/CD (CD-ROM)/HDD (HDD).

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join