USB flash drive installation system

You can use this tutorial to install the Windows 7 7 system on your laptop, desktop, netbook, and computer.

Step 1: First prepare a USB flash drive with at least 8 GB. Then download a USB flash drive boot master (USB Flash boot disk preparation tool) and make your USB flash drive into a boot disk with the boot function. In the following.

Step 2: Download a suitable win7 32-bit system. We recommend that you download the full version of win7 32-bit provided by the U disk boot master without any castrated driver, it basically covers all drivers.

The above two files are: http://www.upanz.com/url/win7-32.html (click can be directly downloaded with thunder) download completed, save to a local hard disk folder.

Open the above link and click "normal download". The normal download speed is very fast. For example:

Click "select the URL to download" and click "OK", for example:

Then, the first file "U disk boot master Professional Edition 6.2" is displayed. Select the path you want to save and click "Download Now"

Then, a system download window "win7_32.gho" is displayed. Click Download now.

Step 3. After downloading the USB flash drive, you must back up the data of the original USB flash drive before making the boot disk. The procedure is as follows:

1) unzip the "U disk boot master Professional Edition 6.2" and start installation. Pay attention to removing unnecessary plug-ins during installation. Insert the U disk to be created, enable the U disk boot master Professional Edition 6.2, and select the U disk drive letter you want to create in the drop-down box. (If there is no drive letter you want, Click Refresh to see it), such:

2) Click the "start to create a USB flash drive" button on the right. The following prompt is displayed, prompting you if you have backed up all the data in the USB flash drive. If you have backed up the data, click "OK. If there is no backup, open my computer and copy the data in the USB flash disk to the hard disk. For example:

3) Now, you can see a progress bar under "current running status" when creating a USB flash drive. For example:

4) after the progress bar is full, it is created successfully. After the progress bar is complete, you will be prompted to click "OK. This process is complete. For example:

Step 4. After the USB flash drive is created, unplug the USB flash drive and re-insert it into the USB interface. Now the USB flash drive can be used as a general USB flash drive, and the remaining space can still store data normally. Copy the downloaded win7_32.gho to the root directory of the USB flash drive. Now, the preparation of the USB flash drive system has been completed. For example:

Step 5. Insert the USB flash drive you just created on the computer where you want to install the operating system, and set the computer to start from the USB flash drive (if not set, click here to view how to set it ). Restart the USB flash drive and choose [1] to enter the PE system. For example:

Step 6. The desktop after entering the PE system is shown in:

Step 6. Open the onekeyghost tool and select the previous "Restore partition (r)" single partition (selected by default ), then, under "Ghost Image path", select the win7_32 system that you previously placed in the USB flash drive. In the partition list below, select the partition to which you want to install the win7 system, which is generally installed on the C drive. Click the "OK" button below. As shown in:

Step 7. Click "OK" and the following prompt window appears. If you want to check the integrity of the win7_32.gho image, select "no. If you are worried that the system is incomplete and avoid half of the system installation failure, select "yes ". Here we select "no ". For example:

Step 8. After selecting "no", a prompt is displayed, indicating whether to restore (or install) the system. Select "yes" to start the system installation. For example:

Step 9. After the above operations, start the system installation steps and wait until the following progress bar is completed. For example:

Step 10. After the progress bar is complete, the following prompt appears: "This restoration is very successful." Ask if you want to restart the computer. Select "yes" to Start restarting. Go to the operating system installation page.

Step 11. After the restart, the system is started. Later, you will see the following Driver Installation interface. If you do not need to install the driver or a blue screen occurs after the driver is installed for the first time, click "close" to close the Driver Installer. After the system is installed, use the driver genie or driver life to install the driver. Generally, the full version of the driver is comprehensive. Supports Assembling computers, laptops, and netbooks. Therefore, this interface usually appears, so you don't have to worry about it. You just need to wait patiently and then OK. For example:

Step 12: After the driver is installed, it will be automatically re-installed to enter the Windows 7 system interface you are familiar. According to Device Manager, all drivers are installed properly. For example: