Use an idle USB flash drive to become the most powerful Router

Source: Internet
Author: User

Some small size USB flash drives are too small to use, and it seems a pity to lose them. However, after a small transformation, we can use our computer to get a powerful router, which not only saves the money to buy a route, but is basically unavailable on the market!

About DD-WRT

Each router device we use usually has its own operating system OS, which is used to set and manage various functions of routing devices. In fact, what we usually call upgrading the router firmware is to update and refresh the operating system of the routing device to make the routing device more powerful. DD-WRT is a Linux operating system, but it is essentially a third-party router firmware. Its Routing and network management functions are very powerful and widely used in Linksys WRT54G/GS/GL, or other 802.11g wireless routers based on the Broadcom reference design. You can refresh the DD-WRT to a supported router device to make the router more powerful. Similarly, we can also let the DD-WRT run independently on a computer, as long as the corresponding hardware, you can let the computer to achieve the functions of the router!

Hardware preparation

As long as a small USB flash drive is idle, It is enough. Of course, this USB flash drive cannot be used as a router separately. However, it can be used as an ultra-small server that can be carried with you and used in combination with various types of computers. At the same time, it is also necessary to append a NIC or a hub to the entire machine.

Install DD-WRT x86

Now, for the U disk "brush" routing firmware DD-WRT. In general, you must have a hardware device to fl firmware. here you need to fl the firmware to the router. But here we will directly refresh the firmware to the USB flash disk. DD-WRT capacity only around 11 Mb, the old U disk mostly has 16 MB to MB space, absolutely enough, this we in a 64 mb u disk brush firmware as an example:

DD-WRT X86 "dd-wrt-public-vga.image (hard drive/memory card Mount mirror file)" and "physdiskwrite 0.5.1 (router IMG write disk tool)" and decompress them to the same folder, open the CMD Command Prompt window and enter the folder where the program is located. Run the following command: physdiskwrite.exe-u dd-wrt_public_vga.image, the program will automatically detect the current system in the hard disk and mobile storage devices, and display the serial number of all storage devices and related parameters. View "Information for \ .. PhysicalDrive *" in detail and confirm the serial number of the USB flash drive on the old machine. "PhysicalDrive *" indicates the serial number of the hard disk and USB flash drive. Generally, if there is only one hard disk on the machine, the serial number of the attached USB flash disk is "PhysicalDrive1". If there are two hard disks on the new machine, the serial number of the USB flash disk on the old machine is "PhysicalDrire2 ", and so on.

The program prompts "Which disk do you want to write ?", That is, enter the serial number of the target USB flash drive. Do not select the wrong one. Otherwise, all data in the USB flash drive will be overwritten. Enter the serial number of the USB flash drive and press Enter. On the screen, check whether the USB flash drive is correct. If yes, select Y. After a few seconds, the firmware of the router is written to the USB flash drive of the old machine, the "11534336/11534336 bytes written in total" prompt indicates that the write is successful.

Tip: The parameter "-u" in the mongophysdiskwrite.exe-u dd-wrt_public.vga.image command, mainly used when the target hard disk or u disk is greater than 800 MB, if the old disk is relatively small, less than MB, you can also remove this parameter when using a CF card.

Set vro

The U disk to the computer, and two network cards are inserted into the network cable, boot start, with just brush into the DD-WRT U disk boot system. After the boot, you can see that the DD-WRT just flushed over the system boot, boot into the Linux system. After the system boot, The DD-WRT automatically detects the network environment and hard disk devices, and automatically sets the network to start providing routing services. Open the browser on your computer and enter the default IP Address "http: // 192.168.1.1" in the address bar of the browser. Enter the user name and password. The Default User Name for logging on to the vro is "root" and the password is "admin ". After logon, the default interface is the English interface. You can change it to Chinese. Click "administrator" at the top of the page to enter the page. Then, set "registrageselection" to "ChineseSimplified.

TIPS: here we introduce the DD-WRT drama directly to the U disk, in fact, can also brush to the CF card, DOM and other storage media. In addition, you can also directly download the "DD-WRT X86" CD image file, directly burn, eliminating the installation process. The CD image can also be directly produced to the USB flash drive, so that a USB flash drive with the "routing" and storage functions is obtained!

Now, you need to set up the ADSL Router to access the Internet. The common network access method may be ADSL dialing, fixed IP address, or dynamic IP address. Here we take the ADSL dialing setting as an example. Other methods can be referred. Click "Settings/Basic settings" at the top of the page, select "PPOE" in "Internet connection type", and enter the account and password of the ADSL dial-up Internet access. In the "Network Settings/router IP" at the bottom, set the address of the local DNS domain name resolution server, and save the settings to start providing the route surfing function. You can enable DHCP in "network address server settings (DHCP)" below.

In addition, many adsl modem also support WEB management. The default value of their IP addresses is often 192.168.1.1, which may conflict with the lP address of the router, the router cannot be installed and used. Therefore, we must change the lan ip address of the router. In the "Network Settings/router IP" section, change "local IP Address" to another IP address, for example, "192.168.1.254 ". After the configuration takes effect, the lan ip address of the vro changes to "192.168.1.254". If you set a vro later, you need to access the vro through an IP address connection.

  Route access

On other computers, you can set the gateway as the IP address of the host router, set DNS, or use DHCP to access the Internet freely. The USB flash drive router is very powerful. It supports DDNS of 3322ORG and DDNS of peanut shells. You can use QoS, speed limit, and connection limit settings to optimize the bandwidth, it also supports vpn pptp client and PPTP server settings, provides VPN access, and allows easy management of various network applications through configuration, such as complete blocking of BT, donkey, and thunder. I didn't expect that an old USB flash drive facing elimination could do so many things?

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.