Use CD + winpe

1. Confirm the system installation and use the CD + winpe
Tools used:
CD
USB flash drive
Winpe can format a drive C, and can be partitioned with one-click ghost. winpe can be used in USB flash disks and CDs.

After the system is installed, no CD is required. You only need to download an old peach winpe USB flash drive, set the USB flash drive as the boot disk, and set the ghost file
Copy to the USB flash drive to partition the hard disk, Ghost.

At the beginning, you can directly use the CD to install the system on the C drive. As a result, after installing the system, the system runs slowly.
And the driver has been running for a long time.
As a result, the disk may be merged if a virus exists. The result partitions are not familiar with themselves. The three partitions are merged, and
Ghost: Installs the radish system and merges the four partitions each time. Whether it is

2. Hard Disk partitioning experience
Start to delete all partitions
Create a primary partition type (File System) Size
Create an extended partition
Create a logical partition type size
Create a logical partition type size
Create a logical partition type size

*************
Click the primary partition to set its status as the most important step. Do not forget.
Many new users cannot start the system because they forget this step.
Select the primary partition of drive C, click the menu bar job --- advanced --- set to function --- and click OK.
**************************************
The partition tool has the partition magician 8.0 PQ and the PM has the DOS version and the Windows version, and the principle is the same.
The overall status chart is:
Type status PRI/log
1. c Primary partition NTFS should be set here as the main function
2. Create an extended partition with no major extension
3. Create a logical partition d ntfs with no logic
4. Create a logical partition e NTFS with no logic
5. Create a logical partition f ntfs with no logic

3. After installing the NIC Driver, I forgot to install the driver. This time, I installed the system with a CD to install the system first, and then I used the system's
Ghost restores the System of the radish, instead of using the ghost on the CD to install the radish. The ghost on the CD will merge the partitions.
Next time you install the system, you must first install all the drivers. Otherwise, it is too troublesome to manually install the drivers.

Experience in installing the system on Ghost
Specify the location of the gho file in the ghost or winpe on the CD, and specify the disk to which the gho file is attached.
In the system ghost, you only need to put the ghost file in the directory specified by the one-click ghost. It will be automatically opened at the next startup.
The Ghost Software is restored with one click, or the installation is completed without specifying the ghost file. Of course, you need to install ghost.
Software. Here, we will describe that ghost has a DOS version and a Windows version. Generally, the Windows version only sets ghost backup.
File, and finally run the DOS version of the program.

4. reinstall the ghost and install the NIC driver. The result is OK.

Summary:
In theory, it is very simple to install a system, that is, ghost. But the difference this time is that it needs to be partitioned, and the ghost tool used is
The system, not the disc, and the partition is also very careful. Be careful when using ghost on winpe; otherwise
The best way to combine and Format hard disks is to use a USB flash drive winpe with one-click ghost.

Finally, we got it done.
Get 1.30 for the first night
Get 2.30 for the second night
Get 12.30 for the third night
Fourth night 22.0