Use the winpe with ptdd Partition Table doctor to solve the problem of Hard Disk 0 track damage

 

Old peach winpe integrates powerful ptdd Partition Table doctor. We strongly recommend that you download the bootable
The image file of the CD is then burned into a winpe boot CD using the recording software. We will insert this CD into the optical drive and ensure that BIOS settings
Correct: Go to the bios and set the first boot device in the advanced BIOS features as the disc to start,
Go to standard CMOS features to see if the IDE channel where the disc is located is blocked and set
If it is set to Auto, the optical drive is automatically detected when the BIOS is turned on.

After entering winpe, start-> disk CD tool-> ptdd Disk Partition Table doctor, open ptdd Partition Table doctor.
1:

(Figure 1)

Let's take a look at the list of partitions before modification, 2:

(Figure 2)

In the list, select the record starting with C: 0, H: 1, s: 1, Main Menu-> partition-> edit attribute. The edit attribute dialog box is displayed. 3:

(Figure 3)

We change the cylindrical 0 to another value, such as 1. If the problem caused by the 0 track still cannot be solved, we can change it to 2.
And so on until you can. 4:

(Figure 4)

After confirmation, two dialog boxes are displayed. We select YES and OK.
Here is the list of modified partitions. 5:

(Figure 5)

If you disable ptdd Partition Table doctor, the system will prompt whether to save the changes. We choose yes. Reboot the computer and insert the Windows installation disc.
Repartition, format, and install the operating system.