The effect of the tutorial is very personalized, the production of only need in lab mode to copy B channel to the Brightness channel, you can get preliminary results. Later adjust the color and the appropriate sharpening can get the effect we need.
Original
Final effect
1. First convert the image mode from RGB mode to Lab mode (open the image, find the image-> mode in the menu edit bar-> Select Lab Color Item), enter the channel panel:
2, in the lab channel to adjust the color: Select B Channel control+a, use Control+c copy the channel, select the Brightness channel control+v paste just copied the B channel, Control+d cancel the constituency. The aim is to highlight the yellow color, add dark blue, so that the colors can be enhanced to get the following image.
3, Color Adjustment: The basic effect has come out, the following we make adjustments to other meticulous aspects: adjust hue saturation (yellow +10 green +27, magenta-10), Color balance (midtones: green-8), or you can adjust to your preferences.
4, sharpen the image: Merge visible layers, sharpen the image in the brightness channel, and then convert the image mode from Lab mode back to RGB mode:
5, the final effect: press and hold control+j copy layer, change blending mode to soft light, transparency 50%. Finally enter the optional color panel (magenta: Cyan +24%, black + 21%; Green: Cyan +30, black +40, yellow-11, yellow: Cyan +6, black +5; Neutral color: Cyan +15) or on demand, the final effect is as follows:
Final effect:
Category: