Final effect Diagram
Material map
1, open the file to copy a layer, the background of the front eyes off.
2, open another piece of material, use the magnification tool, electric shock right button actual pixel, in order to observe the actual pixel picture.
3, with the rectangular marquee tool, select the head, drag it to the background copy.
4, reduce the opacity of layer one to about 50%.
5, the approximate position as the figure.
6, with rubber tools, the hardness reduced to 0, the diameter of the rubber with the flow of adjustment at any time.
7, the opacity will be 100%, eraser is probably the effect of this.
8, from the above effect, it is necessary to put the contrast of layer one a little, hue of classical oil painting, which provides the curve of the blue channel, the other two channels need to fine-tune their own, do not say I did not play out the specific value, this step to their own repeated debugging, the effect of good or bad depends on your color feeling.
9, observe the background picture has a small number of miscellaneous points, in order to add a small amount of noise Gaussian distribution screen.
Through the above hue and contrast and noise added, the effect of adjusting the effect is roughly as shown.
10, through the observation of the above effect, reached two points, the edge line is not natural, saturation high point, respectively, and to reduce.
11, the final effect. There are not many tools used in this picture, it is easy to learn, the tone is not allowed to try more, you can use photo filters or other tools to try the tune.
Note : more Wonderful tutorials please focus on the triple Photoshop tutorial column, triple PS group: 182958314 welcome you to join the