View SLAN on the OLT

View the onu slan ----- on the OLT -----
The user's ADSL account is bound by slan and clan. If you want to know whether the user has bound the wrong port or used the wrong port
There are 3 methods
1. allow the user to log on with a new account (not yet completed), and view the internal and external VLANs in yaxin;
The internal layer (CLAN) can be found on the OUN device: # display service-port board 0 /*
Or: display service-port all
 
2. On ONU, view the SN code or MAC address
Dispaly board 0/0 # record
Then, go to the OLT (generally the ONU gateway) and view the corresponding port number based on the onu sn:
 
 
For example, the OUN is attached to the port OLT 0/1/0.
 
 
OLT-084-HenLiHengKeng-MA5680T (config) # display port vlan 0/1/0
 
---------------------------------------
 
991 3318 503
 
---------------------------------------
 
Total: 3
 
3318 is The onu slan, 991 of which is the management vlan, and 503 is the language vlan.
 
3. Check the OLT under which the ONU is attached according to the Account (suitable when the OUN cannot be connected)
OLT-084-HenLiHengKeng-MA5680T (config) # display current-configuration
 
This command can find the SN number corresponding to the onu ip address, then query the port number based on the SN number, and then query the slan (same as above)
 
 
This article is from the "jk409" blog