Vro and vswitch commands

Vro and vswitch commands

Basic commands for routers and switches

En enters privileged Mode

Conf t global Mode

Int interface number enters interface mode

Exit returns the previous mode.

End return privileged Mode

Hostname host name configuration Host Name

Sh ver view version information

Showmac-address-table view Mac address table

Duplex mode configuration Duplex mode (full Duplex full, semi-dual half, auto negotiation)

Speed Value configuration interface rate (auto match)

Ifconfig

Ping IP address to test connectivity

Exec-timeout 0 0 always online, no timeout lock

No ip domain-lookup disable DNS lookup

Logg syn Information Synchronization

IP add IP address subnet mask configuration IP address (in global mode)

Ip default-gatewaty gateway address configuration switch default Gateway

Password configure console port Password

No sh open interface

Show arp view ARP cache table

Clear arp-cache Clear ARP cache table

Arp IP address Mac address arpa ARP binding

Ping-t + IP address unlimited test (connectivity)

Ping-a + IP address to display the host name corresponding to the IP address

Ping IP address-l byte Size Test connectivity

Ip route ip cidr Block subnet mask next interface Ip Address Configuration static route

No Ip route ip cidr Block subnet mask next interface Ip address Delete static route

The Tracert IP address shows the route of the router.

Wr or copy running-config starup-config to save the current configuration

Erase nvram or erase starup-config deletes saved configurations.

Sh ip route)

Sh mac-address-table view Mac address table (vswitch dedicated)

Sh run to view the current configuration

Sh star: View saved configurations

Line con 0 enters the console Port

Password configure console port Password

Login save information

Line vty 0 4 access the vty0-4 to these 5 virtual consoles for remote connection

Enable password configure privileged mode password (plaintext)

Enable secret password configuration ciphertext Password

Ip default-gatewaty gateway address configuration switch default Gateway

Copy flash tftp backup IOS system

Copy tftp flash upgrade IOS system

Vlan database enters VLAN configuration mode

Vlan Value configuration VLAN

No vlan value Delete configuration VLAN

Show vlan br view VLAN configuration

Switchport access vlan ID is allocated to the interface

Switchport mode access/trunk/dynamic Configure port mode

Sw trunk allowed vlan remove/add serial number delete on trunk, add touch VLAN

Channel-group No. mode on Configure Ethernet Channel

Encapsulation type vlanID number to configure the VLAN label Encapsulation structure

Ip dhcp pool address pool name definition address pool

Network Segment subnet mask Dynamic Allocation of IP segments

Default-router gateway address set gateway address

Dns-server address configuration dns address

Lease period sets the address Lease period

Create Vtp domain Name

Vtp mode server/client/transparent vtp mode

Show vtp password View vtp configuration password

Show vtp status to view other vtp configuration information