Vro debugging Overview

Source: Internet
Author: User

Common ADSL modem route settings method set 1
Hope to be refined !!!
How to set the route for Alcatel-Speed Touch 515

Open the network in the control panel, and then open the TCP/IP protocol attribute of the NIC,
Set the IP address to 192.168.1.1 (or between 1 and 253 );
The subnet mask is 255.255.255.0;
The gateway is 192.168.1.254 (the factory IP address of 515)
DNS configuration: Enter the host name, for example, host, and set DNS search to 202.99.96.68.
Enter 192.168.1.254 in the address bar of the IE browser (Press ENTER) to go to the Web Settings page of the ADSL modem.
A warning screen will appear during the process, and click "continue" to enter. Click the "configuration" option in the left navigation menu, and then select the "WAN connections" option after "configuration" is expanded.
Record the "VPI" and "VCI" values in the displayed information. Then, delete all the items on the right (above the create a new service button) (that is, click Delete, click one, and delete one item until all items are deleted );
Click Create a new service;
Pppoe routed is selected in the ATM, while multu (auto) is the first DSL configuration item );
Click Configure (a table is displayed, so that the input information is not written as mentioned below), where:
Description: you can name it at will, for example, ADSL.
VPI and VCI: Enter the two you just noted!
User name: Your account number (generally the phone number)
Password: Password
Click Configure;
Click Save config;
Click confirm at the end, and click OK in the displayed dialog box. Wait for a while until done appears.

Wait a few seconds after done appears, and then click the status in the framework on the left;
Click the name you just named in description, such as ADSL, which is generally the first one.
The IP address assigned by China Telecom will appear in the table on the right. If the IP address addres is 0.0.0.0, wait a while,
If the IP address is 0.0.0.0 for a long time, the setting is incorrect. You need to reset it. If it is connected, you can view the DNS data to set the DNS on the Nic!
If it is 511, you can use a routing configuration software.

How to Set prestige600 (642) routing and port ing of zyxel

1. First, specify your IP address in the network segment of 192.168.1.
2. The default telnet192.168.1.1 password is 1234.
3. Enter 1 of the 1st items in the main menu.
Routeip = Yes
Routeipx = No
Bridge = No
4. Go to the 2 items of the 3rd items in the main menu
Menu3.2-TCP/ipanddhcpethernetsetup
Dhcpsetup
DHCP = none
Clientippoolstartingaddress = N/
Sizeofclientippool = N/

Primarydnsserver = N/
Secondarydnsserver = N/
Remotedhcpserver = N/
TCP/ipsetup:
IPaddress = 192.168.1.1 (this is the IP address of the router)
Ipsubnetmask = 255.255.255.0
Ripdirection = both

Version = rip-1
Multicast = none
Ippolicies =
Editipalias = No
Pressentertoconfirmoresctocancel:
Pressspacebartotoggle.
5. Go to one of the 11th items in the main menu
Routeip = Yes
Bridge = No
Enter your pppoe user name and password on the user and password. Save. OK
6. Enter one of the 24 items and wait until the first line is up.
7. NAT: Enter 15 items and fill in the IP address of your machine sub-account after default ~ (PWS of Win98 is not supported .)

Note: Huaqin has 642 and 64-2 s, mainly at the bottom of the device, which is clearly indicated. 64-2 S should be an upgraded version of 642, supporting Web debugging. Username: Admin, password: 1234

How to set the built-in dialing (route mode) of kemaiyi ADSL

1. Set the NIC address to 192.168.1.2, subnet mask: 255.255.255.0, Gateway: 192.168.1.1, and Master DNS: 202.99.96.68.
2. Enter 192.168.1.1 on the settings page. Username: Root and password: Root.
3. view "Homepage" -- "System View" -- "wan interface" to find the "interface" (EOA-x) for the VPI/VCI (that is, or) value of the Region) and lower layer interface (aal5-X) (Note: X is any number )!
This step can also be understood as finding out the EOA and AAL5-values corresponding to or of your region!
4. Click "bridge" -- Delete "EOA-X" (X indicates the value you just noted down)
5. Click "bridge" -- "EOA configuration" -- delete the corresponding "aal5-X" (X is the corresponding value you just noted down)
6. click "Wide Area Network" -- "PPP configuration" -- "add" -- select "aal5-X" in "atmvcc" (X is the value you just noted down), others remain unchanged by default, enter your phone number and password in the user name and password (your phone number by default ).
7. Click "manage"-"Submit/restart"-"Submit"-"restart "! (This step only saves settings. In fact, you can access the Internet after completing step 1)

Summary: This method is used when the nic ip address, subnet mask, gateway, and DNS are specified. If you want to use the IP address automatically, You need to activate the DHCP function of the device, the method is not described here!

D-Link 500 route settings

1. Set the nic ip address to 10.1.1.2, subnet mask: 255.0.0.0, Gateway: 10.1.1.1, and DNS: 202.99.96.68 (Win9x restart, Win2k/XP)
2. Open IE and enter 10.1.1.1 in the address bar. the username and password are admin (if not changed !)
3. Click "home page"> "quick Settings". Select "0" as the top value.
4. The encapsulation format should also be changed to pppoe and LLC, and the VPI/VCI values should also be filled in. (generally, the three bureaus and seven bureaus are 8, 35, and the other bureaus are 0, 35 !)
5. Set the bridging option to disable, set IGMP (as though not clearly remembered) to enable, and select the router as enable.
6, has been set up, you can click the WAN--PPP-if the right shows link up, then congratulations, debugging successful!

ADSL cat route setting method

1. Enable Routing

Route settings
Now, you are most concerned about routing. Now I want to explain how to set routing:
Nic TCP/IP Settings

1. Right-click "Network neighbors" on the desktop and select "properties" from the pop-up menu"

2. After the network dialog box appears, under the "configuration" tab, select "TCP/IP ......" (The ellipsis varies depending on your computer's network adapter.) Click properties"

3. The "TCP/IP properties" window is displayed. In the "TCP/IP properties" window, select the "specified IP Address" option on the "ip address" tab. Enter the IP address of the NIC, for example, 192.168.1.14, and subnet mask 255.255.0 (the IP address in this example is used to be consistent with the factory address of ADSL. You can set the adsl ip address on the configuration screen as needed)

4. Select the "Gateway" tab C.4, enter the gateway IP address 192.168.1.1 (which is the default address of ADSL), and click "add"

5. Select the "DNS configuration" tab and select the "Enable DNS" option. In the "DNS server search" sequence bar, enter the IP address of the DNS server and click "add" to add it

The preceding settings are for the Win9x system. For details, refer to the WINNT system!

Step 2: The "TCP/IP properties" window is displayed. In the "TCP/IP properties" window, select the "specified IP Address" option on the "ip address" tab. Enter the nic ip address, for example, 192.168.1.14, subnet mask 255.255.0, Gateway: 192.168.1.1 (this is the default modem value), and then enter the IP address of the DNS server.

The following is a summary!

6. Click OK to return to the "network" dialog box.

7. Click "OK" in the "network" dialog box to exit (the 9x system can restart the machine, but not the NT System)

The method of route setting for db102 DB102-A DB102-B db108

After the network adapter is set up, open the browser and type http: // 192.168.1.1; in the address bar ;. Enter the User Name Admin and password dare (this is the default value. If you cannot enter this value, contact your local dealer and telecom)

1. Wan settings
1. 1-7 "virtual circuits" are closed. Here, we take the 1 virtual circuit as an example. The method is to select 1 in the "virtual circuit" in the "Wan" Settings and press "Submit ", select "enable", select "no", and then press "Submit" to complete the operation. The other items also do the same *.

2. Set "enable" of 0 virtual circuit to "yes"

3. Set VPI and VCI values (For details, refer to the local telecom)

4. For dynamic routing, select "pppoe LLC" in "Encapsulation Format"

For Static Routing, select "1483 bridged ip llc" in "Encapsulation Format"

5. Select "disabled" in the "bridge" option"

6. For dynamic routing, enter "User Name" and "password" in the PPP "User Name" and "password" columns (the specific value is specified by the DSL service provider)

For Static Routing, enter "static IP Address", "subnet mask", and "Default Gateway" (the specific value is specified by the DSL service provider)

7. Click "Submit" in the lower part of the page to save the setting value.

Ii. Lan configuration.
The parameters on this page can be left unspecified. Keep the default configuration.

Iii. NAT configuration
Set "Nat" to "napt ". Click Submit to save the settings.

Iv. Save Configuration
Click "Save settings" in the user configuration bar to go to the "Save settings" page. Click "Submit" to save all the above settings. ADSL will automatically restart and run according to the set parameters.

Note: VPI and VCI must be correct! Tianjin is 0/35 and 8/35!

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.