Vro setting LAN (1)

This article describes how to set up a LAN for a vro, and sets up a LAN for sharing resources among other virtual servers.

5. Click OK to end the operation.

VII. Notes

A. The host must use the Windows XP operating system. Computers in the LAN can use earlier windows versions, such as windows 98, Windows ME, and windows2000.

B. What is provided here is a typical situation. To expand the network scale, you can simply overlay it here.

C. This article is based on the English test version and cannot guarantee the future official version. In particular, the performance of the Chinese official version is exactly the same.

The answer on the first floor is really hard enough. Set it according to his opinion. Finally, don't forget to confirm his answer as the optimal answer.

In addition, set the home LAN shared Internet) can have a more simple way, ADSL, TP-LINK router, 2-4 computers, each computer is equipped with a network card), if there are more than 4 computers, you need to add a Hub or vswitch. When ADSL connects to the WAN port of the vro and makes necessary settings for the vro, CALL me or QQ123960413 over SKYPE ), the computer connects to the four Lan ports of the router through a network cable. In this way, a small LAN can be formed.

The broadband cat is connected to the router, and the computer and the router can be connected with a network cable. To enable mutual access between the two computers, you only need to enable the sharing of the computer, note that the two computers must be in the same working group. Set the broadband user name and password in the vro.

1. The two computers must be in the same working group. Right-click "my computer" and choose "properties"> "computer name"> "Working Group". For example, 1 # The machine is a WORKGROUP ), in the same way as above, can I view 2 # Is this machine the Working Group? If not, click Change-the Working Group box at the bottom can be changed to the same working group name as the Taiwan machine. You can also customize the Working Group name, but the name must be the same.)-click OK.

2.1 # machine)-Right-click the folder to be shared-properties-share the folder on the network and check the box before sharing the folder-click the application.

3, 2 # double-click "Network Neighbor" on the desktop-view the workgroup computer-then double-click the icon of the computer name of the server that appears, and the folder you want to share will appear-double-click it to open it.

4 In turn, 2 # share the machine 1 # The folder of the machine is 2.3

5. To cancel sharing, just cancel the 2 check box.

1. Connection and basic settings

1. Cable Connection

To use a Broadband Router, you must first install a Broadband Router. Connect the POWER of the Broadband Router first, and then the POWER (POWER) lamp on the Broadband Router panel will be on. The Broadband Router SYSTEM starts to start, and the SYS or SYSTEM light will flash. Connect the network Cable to connect the wide line (cross line, wide line can be the ADSL/Cable MODEM line of the Ethernet interface, or the network Cable connected to the LAN) to the WAN port of the Broadband Router, if the cable is okay, the WAN port light on the Broadband Router will be on. Next, use a direct connection to connect the NIC or hub/switch on the computer (for example, switch or hub, make sure that the connection method is to connect the UPLINK port or common port of the switch from the LAN port of the router, and then connect to the NIC using the standard express line from the common port of the switch) connect to any interface in the LAN of the Broadband Router, and the corresponding indicator in the LAN of the Broadband Router will be on.

Although the current broadband routers support the auto-crossover feature of the twisted pair suspension sequence, and can be compatible with the direct or cross lines at the same time, it is best to do it in a regular way during connection.

2. automatically obtain the IP address

A Broadband Router is integrated with a DHCP server, and DHCP servers are enabled by default. It can automatically assign IP addresses to the connected computers, therefore, do not add IP addresses or set up DNS for all computers connected to a Broadband Router.

Therefore, before using a Broadband Router, you need to set the TCP/IP protocol of your computer's network adapter to "automatically get IP addresses" (when the network IP address conflicts or everything is set properly, you can use this method when you still cannot log on to the vro setting interface ). In the Windows 98/Me operating system, choose "Control Panel"> "network"> "general"> "TCP/IP-network card model of the current computer"> "properties ", set "ip address" to "automatically retrieve IP Address", "DNS configuration" to "disable DNS", and "Gateway" to blank (Deleted ).

In Windows/XP, choose Start> Control Panel> network and Internet connection> network connection> Local Connection> Internet Protocol (TCP/IP)) "→" attribute ". In the displayed window, make sure that "automatically obtain IP Address" and "automatically obtain DNS server address" are all selected and save and exit.