Vswitch DHCP server settings

We have introduced the configuration of the DHCP server in previous articles, but some of them are still unclear. So here we will make a summary. For you to solve the configuration problem, for many friends, the switch DHCP server is still a strange word. What does it do? What is its role? Let's take a look at these questions.

What is a DHCP server? Why do we need to configure a DHCP server? The so-called DHCP Protocol is short for the Dynamic Host Configuration Protocol, that is, the Dynamic Host Configuration Protocol, which is one of the TCP/IP Protocol clusters, it is used to dynamically allocate IP addresses to other computers in the network.

It may be unfamiliar to everyone to talk about the DHCP protocol. But when it comes to "Automatically Obtaining IP addresses", you may be familiar with installation experience. In windows 2000, after opening the "Local Connection Properties" dialog box, double-click "internet protocol TCP/IP)" to open the "internet protocol TCP/IP) properties" dialog box, there is a "automatically obtain IP Address", of course, we can also directly specify a fixed IP address to the computer ).

But why can we enable the computer to automatically obtain the IP address? Imagine if every computer can automatically obtain any IP address, it would not be a serious conflict of IP addresses or a mess in the online world. However, in real life, the use of networks that automatically obtain IP addresses is not as chaotic as we think. Why? The reason is that the DHCP server of this switch exists in our network. This DHCP server manages the IP Address Resources in the network, so that each IP address is allocated to each desired host in the network.

Why do we sometimes need a vswitch DHCP server to automatically allocate IP addresses? For example, suppose there are 400 computers in a certain unit, but at any time, there will be no more than 255 computers going online. If we use a fixed IP address, we need to apply for 400 IP addresses for this unit. However, if we use dynamic IP Address Allocation, we only need to apply for 255 IP addresses, it saves 145 IP Address resources. The DHCP Service is especially used when the IP resource usage density is low.

However, in the conventional method, you need to configure a dedicated server for DHCP server, which will undoubtedly increase network consumption. According to my experience, sometimes some low-layer network devices, such as routers and switches, integrate the DHCP service in a small network, we can use the DHCP service on these network devices to configure the DHCP server of our own switch, instead of configuring another server for the DHCP service.

The following is an example of how to configure the DHCP server of a cisco switch:

Assume that there are 400 hosts in a network, of which 255 are requested for allocation. The range is from 202.38.X.0 ~ 202.38.X.254, of which 202.38.X.1 is used to allocate to the Gateway. There are three servers A, B, and C in the network, and their fixed IP addresses are 202.38.X.2, 202.38.X.3, 202.38.X.4, respectively, all other IP addresses are available for dynamic allocation. The network topology is as follows:

Telnet to the vswitch and enter the DHCP server setting command line;

Start the DHCP service:

Service DHCP

For a fixed IP address, we need to agree on it first:

Ip dhcp exclude-address 202.38.X.2 202.38.X.3 202.38.X.4

Before assigning an address, test the address. If someone is using this address, assign another address to avoid IP address conflict:

Ip dhcp ping packets 3

Sets global variables of the DHCP address pool ,;

Ip dhcp pool 1

Set the dynamically assigned IP address range and subnet mask:

Network 202.38.X.0 255.255.255.0 // dynamically allocates IP ranges. The IP ranges from 202.38.X.0 to 255.255.255.0, that is, all IP addresses in this segment.

The Gateway in the DHCP server settings of the vswitch:

Default-router 202.38.X.1

Set DNS server address

Dns-server 202.38.193.33 202.112.17.33

This is simple. The DHCP server configuration on a cisco switch is complete. Note that not all vswitches have DHCP services. I use cisco vswitches. Therefore, please pay more attention when buying them.

The above is the entire process of configuring the DHCP server of the switch.