Vtp and layer-3 switching Configuration

Vtp and layer-3 switching configuration (config) # ip routing enable the routing function (config-if) no switchport configuration routing interface (config-if) ip helper-address DHCP-server DHCP relay
VTPServer mode the management of vlan in The vtp domain. The client mode monitors and modifies the vtp configuration of the local machine. The transparent mode does not participate in vtp and only forwards vtp
1. Create vtp domain (config) # vtp domain domain_name2. Configure vtp mode (config) # vtp mode {server | client | transparent}
3. Configure vtp password (config) # vtp password password4. configure vtp trim (config) # vtp pruning
5. Configure vtp version (config) # vtp version 2 is the running version by default 16. view the configured vtp password # show vtp password
7. Check other configurations # show vtp status. Check whether vtp v2 mode is enabled. If yes, vtp version 2 is used.