We also installed and successfully upgraded the black apple: iantares v2.2 to 10.6.7.

The configuration is as follows:

Dell 640 m

CPU: Intel Core 2 Duo 1.6g t2050

Chipset: Intel 945gm

Graphics: Intel gma950 (27a2)

Sound Card: sigmatel 92xx

NIC: Broadcom subnet x

Wireless: Intel PRO Wireless 3945a/B/g

 

We use donghuang iantares v2.2 10.6.3 snow leopard dial for installation, except that the wireless network card does not have a driver, other perfect. refer to the following post for installation:

 

Http://bbs.pcbeta.com/viewthread-820796-1-1.html

Http://bbs.pcbeta.com/viewthread-786959-1-1.html

 

However, my configurations may be different from those of them (it is estimated that they are CPU and chipset). For the first time I install them completely, I chose to install them, and there was no response after startup, the error message is not displayed when you use the-V startup parameter.

During the second installation, the patch options related to the chipset were not correctly installed, the hpetdevice patch was not selected for the third installation, and forcehpet was selected as the startup parameter, therefore, it is unclear what causes the first installation to fail. Do not use bootthink as the boot program, directly use the default boot program on the disk, and select only 32bit as the startup parameter.

 

The details are as follows:

 

1. Do not select the original Kernel

2. Pilot Program: Default, start option only 32bit, forcehpet (cannot select hpetdevice)

3. Crack the kernel: Select pcj1030 (the installer automatically adds the kernel string pcj1030 to the boot parameters, and the parameter file is saved in/extra/COM. Apple. boot. plist)

4. Video Card: Choose intel gma950 (27a2), perfect driver

5. NIC: Select applebcm1_x

6. Sound Card: Select voodoops2 and voodoops2prefpane

7. Wireless Network Card: no solution, you can only buy a USB wireless network card with silver

8. chipset: removeioatafamily, ioatafamily, appleintelpiisata, appleintelpiixata, totallyfixstillwaiting, other options default

9. Power Management: voodoobattery 1.3.2 and voodoopoweracpi 1.2.5. The remaining default values are as follows:
10. Others: select all three.
11. Patch: Remove elliottforcelegrtc (otherwise panic) and voodootscsync. The remaining values are default;
12. Utility: select the appropriate tool. If you do not select the fit input method, the version is old. I chose osx86tool, kext tool, and Mac pilot.

Start to install ............

1. Do not enter Mac after restart. In Windows, install macdrive and enter the Mac partition. Replace the folder named "/system/library/extensions/" with appleintelintegratedframebuffer. kext to solve the problem of black screen startup;
2. If everything is normal, you can upgrade it online to 10.6.7, 1.06 GB;
3. After the update is downloaded, the system prompts you to restart. Back up the update program and save it to the/library/updates/directory in the Mac partition. In addition, set iousbfamily under system/library/extensions. kext and iousbmassstorageclass. kext backup, because the two files will be replaced with the new version after installation and update, which may cause the USB mouse, USB flash drive, and other devices to be unavailable. I forgot to back up the two files twice, so it is not possible to verify whether the original file is restored and the effect after the upgrade, the versions of the two files are 4.1.8 and 3.6.5, I am using a foreign IOUSBFamily-378.pkg installer and iousbmassstorageclass. kext version 2.6.1 is replaced and then solved. The replaced versions are 3.7.8 and 2.6.1.

4. Restart. At this time, appleintelintegratedframebuffer. kext is updated again, and a black screen is displayed directly. You have to use Windows, and use macdrive to replace it again. OK!

5. Restart Mac and enjoy!